FKM / Viton commercial grade Fluoroelastomer Sheet
The selection of the most suitable Viton rubber sheet to be used for any specific end-use implementation shall be determined by the end-use provider and, in specific, whether the detail of it must provide: acid resistance or base resistance to hydrocarbon liquids, flexibility at high temperature (holding seal at low temperature).
Viton FKM sheets can handle high temperatures in aggressive fluids, ensuring reliability and can continuously serve at 250 ° C even after at peaks up to 315 ° C.
FKM rubber far outlasts nitrile rubber and other general-purpose elastomers are the heat-resistant characteristics. Its reliability can allow prolonged service periods and assist extend budgets for servicing by decreasing unplanned downtime across many sectors.
 Oil Resistant |
 High Temperature Resistant |
 Non Permeable |
 Weather Resistant |
 UV Resistant |
 Ozone Resistant |
FKM / Viton is a 75 Shore A smooth finish specification grade Type A Viton compound. It has excellent resistance to aliphatic and aromatic hydrocarbons, petroleum oils, fuels, ozone and weather, chlorinated solvents, lubricants and animal or vegetable oils.
FKM Viton® Fluoroelastomer Sheet is an economical sheet, formulated with 100% virgin Fluoroelastomer base and does not contain regrind or reprocessed elastomers. It will withstand exposure to temperatures of 250 degrees Celsius and has the excellent chemical resistance that is typical of fluoroelastomer compounds.
The offered FKM sheet can have light fabric impression finish as well.
- Shore Hardness: 75° ± 5°
- Temperature: -30°C to +250°C / -30°C to +210°C (3, 5 and 6mm)
Applications
Fluoroelastomer sheet material is especially recommended for fabrication into FKM viton gaskets, FKM seals, packings, washers, Viton pads, shims, curtains, joints and other FKM parts for use in severe operating conditions.
| General specification | |
| Applications: | Fluoroelastomer sheet material is especially recommended for fabrication into FKM gaskets, seals, packings, FKM washers, FKM pads, shims, curtains, joints and other parts for use in severe operating conditions. |
| Hardness by Shore A | 75 Deg |
| Resistance to: |
|
| Temperature resistance °С | -30С - +250°С |
| Color | Black |
| Technical datasheet | Viton / FKM Sheeting - TDS |
Applications
- Industrial Applications
- Automotive Seals
- Chemical Processing
FAQ
What is the maximum temperature that FKM sheets can withstand?
How does FKM compare to nitrile rubber?
What applications are suitable for Viton rubber sheets?
FKM / Viton commercial grade Fluoroelastomer Sheet
- Brand: UK
- Product Code: Viton commercial grade Fluoroelastomer Sheeting
- Availability: In Stock
.svg-50x50.png "UK")
Available Options
Related Products
Viton gaskets
FKM / Viton gaskets Viton® rubber gaskets are resistant to alkalis, animal and vegetable oils, chlorinated hydrocarbons, fuels and concentrated acids. They also have excellent resistance to high temperatures. However, Viton® rubber gaskets are not suitable for ketones such as acetone and organic acids. This gasket material has outstanding thermal stability, and is highly resistant to hydrocarbons, additives, oil and oils. The Viton / FKM..
VITON RUBBER WHITE FDA COMPLIANT
FKM / VITON RUBBER WHITE FDA COMPLIANT White food quality Viton® rubber sheeting is FDA approved and is resistant to chlorinated hydrocarbons, fuels, acids and heat. It is is not suitable for ketones such as acetone and organic acids. White food quality Viton® rubber sheeting is popular for gaskets, seals, strip and joints; particularly in food and pharmaceutical applications. We also offer FKM rubber sheeting - white food quality as an alternative to Viton®..
FKM / Viton sponge Sheeting
FKM Sponge Viton sheeting The fluoroelastomeric FKM viton sponge rubber, made from fluoroelastomers combines properties from both material categories and applications which were not realizable in the past are now possible. Sponge Viton / FKM sheeting is: a cellular expanded fluoroelastomer with outer skin soft up to 15 Shore airtight at lowest surface pressure Viton Sponge is a closed system of cells, formed on both sides with a continuous membran..
VITON™ Rubber Sheeting - Grade A
VITON™ Rubber Sheeting - Grade A There are some intrinsic variations between the different groups of Viton fluoroelastomers in terms of pressure set strength, low heat flexibility and resistance to certain groups of liquids. Depending on their comparative strength to fluid and chemical attack, standard kinds of VitonTM fluoroelastomer products are named as A, B or F. The fluid resistance variations are the consequence of distinct fluorine concentrations in the polymer, ..
VITON™ Rubber Sheeting - Grade B
VITON™ Rubber Sheeting - Grade B Viton rubber sheets of this grade are produced of Premium Viton type B: 68% Fluorine. Viton™ type B is more resistant and maintains more stability after dry heat aging than Viton™ type A. It is suggested for applications needing maximum elastic properties preservation in combination with excellent mechanical characteristics. Viton™ type B provides superior strength to aggressive acids diluted as well as to concentrated acids. ..
Genuine Viton® Rubber Sheets
Genuine Viton® rubber sheets All of our Genuine Chemours Viton Rubber Sheeting is produced in the UK or Europe using high-quality Vitonpolymer to ensure absolute conformance with the standard. We offer a commercial fluoropolymer (FKM) rubber sheeting for applications where reliability requirements are higher than what other synthetic polymers like Neoprene, Nitrile or EPDM can achieve, but while these types of rubbers don't arrive with the same technical support and gua..
Reinforced FKM / Viton gaskets
Reinforced FKM / Viton gaskets Reinforced Viton® rubber gaskets are resistant to alkalis, animal and vegetable oils, chlorinated hydrocarbons, fuels, and concentrated acids. They also have excellent resistance to high temperatures. However, reinforced Viton® rubber gaskets are not suitable for ketones such as acetone and organic acids. This reinforced FKM gasket material has outstanding thermal stability and is highly resistant to hydroc..
White FDA Approved FKM / Viton gaskets
White FDA Approved FKM / Viton gaskets The white food safe FDA approved Viton® / FKM gaskets are heat, fuel, acid, and chlorinated hydrocarbon resistant. They can be used with any kind of food. Moreover, the FKM food-safe gaskets are resistant to Acetone and other ketones, as well as organic acids. White is the color of choice in almost all food standards and for pharmaceutical applications too. The white FDA Viton® rubber gaskets come in a hardness of 70° durometer, has ..
Tags: FKM, /, Viton, , commercial, grade, Fluoroelastomer, Sheet