Compression stainless fittings
Screw is not the same screw! This phrase is especially true for Stainless Steel Pipe Fittings, which depend on the highest security and with little downtime.
The heart of a cutting ring fitting according to EN ISO 8434-1 (DIN 2353) is the cutting ring. In most cases, the specially designed and tested by Germanischer Lloyd Two edge cutting rings are used, which have shown themselves to be very precise and highly reliable a million times. The cutting ring seals the fully assembled screw in three prominent places.
The major advantages are:
- Extremely good cut in
- High tightness, no rust on the surface
- Safe installation
- No "set" of the cutting ring
DIN2353 Cutting ring - check valve - at both Ends for DIN EN 8434-1
DIN2353 Cutting ring - BSP - Parallel - B - SC Male Stud Couplings S-Series Thread: BSP - Parallel Sealing by Sealing Shoulder Form B Pressure Tube O.D. Thread Approx. Dimensions Order-Code PN D1 G L1 L2 i SW1 SW3 Series S 630 6 G 1/8" 28,0 13,0 8 14 17 GE-SR-06-G 1/8"-SC 630 6 ..
DIN2353 Cutting ring - Metric - Parallel - SC - check valve
DIN2353 Cutting ring - BSP - Parallel - B - SC Male Stud Couplings L-Series Thread: BSP - Parallel Sealing by Sealing Shoulder Form B Pressure Tube O.D. Thread Approx. Dimensions Order-Code PN D1 G L1 L2 i SW1 SW3 Series L 315 6 G 1/8" 23,0 8,5 8 14 14 GE-LR-06-G 1/8"-SC 315 6 G..
What are the key features of compression stainless fittings?
Compression stainless fittings are designed for high reliability and security. The core element is the cutting ring, which is usually manufactured according to EN ISO 8434-1 (DIN 2353). These fittings utilize specially designed two-edge cutting rings that ensure a tight seal in three critical areas, thus minimizing the potential for leaks. For instance, the DIN2353 Cutting ring - BSP - Parallel - B - SC is an example of a high-performance cutting ring used in these fittings.
How do I select the appropriate compression fitting for my application?
When selecting a compression fitting, consider factors such as the pressure requirements, the type of fluid being transported, and the environmental conditions. It is essential to ensure compatibility with the pipes and other fittings being used. For applications requiring check valves, the DIN2353 Cutting ring - check valve - at both Ends for DIN EN 8434-1 may be suitable, as it provides additional security against backflow.
What maintenance is required for compression stainless fittings?
Compression stainless fittings generally require minimal maintenance; however, it is advisable to perform regular inspections to check for signs of wear, corrosion, or leakage. Ensure that the fittings are properly tightened according to the manufacturer's specifications. If leaks are detected, the fitting may need to be disassembled, inspected, and potentially replaced with a new fitting like the DIN2353 Cutting ring - BSP - Parallel - B - SC to maintain system integrity.