The type 6000 resilient seated gate valve PN16 has a body of EN-GJS-400 DUCTILE IRON (GGG40) and EPDM COATED DUCTILE IRON wedge
| DESIGN | TS EN 1171 |
| END CONNECTION | FLANGED TS EN 1092-2 / ISO 7005-2 |
| FACE TO FACE | TS EN 558 Seri 14 / DIN 3202 F4 |
| TEST | TS EN 12266-1 |
| MARKING | TS EN 19 |
FEATURES
• The type 6000 PN10/16 Resilient Seated Gate Valve is operating by the EPDM covered iron wedge moving perpendicular to the flow axis through a worm machined stem multi turned
• %100 tight sealing is achieved through EPDM covered wedge fully contacting the fusion bonded epoxy coated flow surface
• In each time the valve is opened, the flow on the line cleans the sealing surface, prevents from dirt and deposits
Rating: PN10-16 DN40-DN600
• With its short installation length(DIN 3202 F4), doesnot occupy a big place
• It has ductile iron body and stainless steel stem
• Inner and outer surfaces are coated with minimum 250 microns fusion bonded epoxy
• Suitable to install actuator and gearbox
• Suitable to use with ground and underground applications. Can be operated with extension spindle
• Very low head loss rating. Can be operated with lower torque ratings, no maintenance needed
APPLICATIONS
Hot Water, Cold Water, Fluids without acidity or alkalinity properties
TEMPERATURE
+130 °C
| Valves Specification | |
| Actuation | Electric actuator, Pneumatic or hydraulic actuator, gear-box, ISO top-flange; |
| Connection | EN1092-1 flanged |
| DN: | 40, 50, 65, 80, 100, 125, 150, 200, 250, 300, 350, 400, 450, 500, 600 |
| PN: | PN 10, 16 |
| Seal Material | EPDM |
| Tmax | 130 °C |
| General specification | |
| Applications: | Hot Water, Cold Water, Fluids without acidity or alkalinity properties |
| Technical datasheet | Resilient Gate Valve - GGG40, PN16 |
Applications
- Industrial Applications
- Water Management
- Chemical Processing
FAQ
What material is the valve made of?
What is the pressure rating of this valve?
How does the sealing mechanism work?
RESILIENT SEATED GATE VALVE PN16, GGG40
- Brand: Czech Republic
- Product Code: RESILIENT SEATED GATE VALVE PN16, GGG40
- Availability: On stock
Available Options
Related Products
Resilient Seated Gate Valve for Gas - PN16
Resilient gate valve for gas PN10/16, DN 40 - 300 Body: EN-JS1050 Coating: Epoxy Resilient-seated gate valves according to European standard EN 1171 with straight, smooth and non-constricted passage. Internally and externally EKB. For Gas, air and non-aggressive gases. DVGW certificate ... Long centric wedge guided for minimal operating moments Maintenance-free due to medium-free spindle bearing and permanent lubrication Triple seal for long service..
Enamelled - Resilient seated gate valve - GGG-50
The enamelled soft sealing gate valve hits the market as a highly innovative and ready to work design entirely safe for a long lifetime. Optionally we can manufacture gate valves completely enamelled. The vitreous enamel is a substance highly resistant to corrosion, abrasion, sunlight and sedimentation due to its low porosity. The enamel is vitrified at 720 ° C and gets a perfect and permanent bond to the foundry. Our extensive experienc..