When selecting materials for public health partitions, it is necessary to consider whether the materials have excellent impact resistance, water resistance, moisture resistance, drug resistance, heat resistance, abrasion resistance, weather resistance, etc.; sunlight will not cause discoloration and fading. In addition, the product is difficult to get dirt, easy to clean, and convenient to maintain.

HPL (High-pressure Laminate) has no affinity for water among the commonly used materials for public health partitions, so HPL panels are slightly better than partition panels of other materials in terms of waterproof and moisture-proof effects. The base material of HPL has stable chemical properties and can withstand the erosion of almost all kinds of acid and alkali substances. Therefore, it can also fully win the task in the environment containing acid substances such as the toilet.

What are the advantages of HPL material as a toilet partition?

• Moisture-proof and waterproof: The phenolic resin high-pressure board has low water absorption and will not accept moisture to separate the covering paper from the kraft paper, and can be washed directly.
• Various styles: There are a variety of HPL surface colors to choose and match to create the best visual effect.
• Impact resistance: Compared with plywood, its hardness is very high, and it is suitable for places that are easily damaged by people in public places.
• Acid and alkali resistance: After high temperature and high pressure treatment, it will not have any chemical reaction to general acid and alkali.
• Wear and scratch-resistant: The phenolic resin high-pressure plate is treated with high temperature and high pressure, and the surface is wear-resistant and scratch-resistant.

Toilet partition solutions provided by GTeek

Components of HDL toilet partition

A. Partition panel
B. Corner fastener
C. Adjustable leg
D. Door
E. Aluminum bar
F. Wall
G. Front board
H. Hinge
I. Coat hook
J. Lock
K. Knob
L. Floor

Installation Process

1. Fix the adjustable leg
   Adjust the horizontal size between the door leaf and door crack, then boreholes in the panel, and fix the adjustable leg in the appropriate location with screws.
2. Fix the corner fastener
   Draw a center line on the wall,(generally in the center of two toilet seats after that use a drill to bore holes, embed a rubber plug into the holes, and then fix the comer fasteners on the wall.
3. Fix the front board and middle board
   According to the corresponding position of the support leg and comer fastener, install the comer fasteners on the connect position of the front board and middle board, and then connect the front board and middle board as a T shape.
4. Initially formed toilet partition
   Fix the T shape frame on the corresponding position of the support leg and corner fastener with screws., toilet partition formed.
5. Fix the bar
   Fix the bar on the front board, adjust each door crack size, and fix with screws one by one.
6. Install door
   First, fix the hinge(no cover)on the door, keep a suitable door crack, then fix the hinge(lower part of the hinge)with crews, and adjust the hinge to let the door open and close freely.
7. Indicator lock, knob
   Line and drill on the door or T panel according to the hole distance of different locks, and adjust the screw of the indicator.
8. Fix the coat hook
   Cover the screw cover, and hinge cover, and check thoroughly again, Toilet partition installation is finished.

Cooperation Cases