Stainless Tees
The purpose of a tee is to allow the flow at about 90 degree to the core path of flow. The foremost flow is passing through the ‘run’, whereas the 90 degree opening is acknowledged as the ‘branch’.
There are several types of stainless tees – such as Equal Stainless Tee, Unequal Stainless Tee, Reducer Stainless Tee, etc. Meanwhile, Equal Stainless Tee Butt Weld fittings look like the alphabet of ‘T’, where one vertical and two horizontal pipes can be joined. Appropriate for diverse industry uprights, these tees are extremely and highly praised for their quality.
Stainless Tee - equal - seamless - DIN EN 10253
Stainless Tee - equal - seamless - DIN EN 10253 The primary purpose of a butt welding stainless tee is to make a 90° branch from the main run of pipe. Standard there are 2 possibilities, on behalf of the equal tee and reducing tee. The equal tee (or straight tee) is used as the branch has the same diameter as the run-pipe. The reducing tee is used as the branch has a smaller diameter as the run-pipe. Properties The stainless Tee has three openings to connect ..
Stainless Tee - reduced - seamless - DIN EN 10253
Stainless Tee - equal - reduced - DIN EN 10253 The primary purpose of a butt welding stainless tee is to make a 90° branch from the main run of pipe. Standard there are 2 possibilities, on behalf of the equal tee and reducing tee. The equal tee (or straight tee) is used as the branch has the same diameter as the run-pipe. The reducing tee is used as the branch has a smaller diameter as the run-pipe. Properties The stainless Tee has three openings to connect b..