PTFE bushings - 15% Graphite Filled

Graphite filled PTFE bushings offer some similar advantages to PTFE filled with 'normal' carbon but without the improved wear resistance. Graphite decreases the friction coefficient and PTFE bushings filled with graphite have excellent self-lubricating properties.

PTFE graphite is available in dark gray color and has a hardness of 60 shore D. The compounds of these PTFE bushings are 15 percent graphite and 85 percent virgin PTFE.  By combination of carbon, glass or graphite can be achieved the cumulative advantages of all three fillers.

 

PTFE graphite bushings have an enhanced conductivity and one of the lowest friction coefficients. The wear characteristics are especially good in soft metal service. PTFE graphite bushings are subject only to powerful oxidizing media attacks.

The crystalline shape of graphite helps to reduce the wear of mating sections of soft metal. Under corrosive conditions, it works well.

To improve this property, graphite lowers the friction coefficient and is therefore often added to other types of filled PTFE. It improves the deformation of the wear properties under load, strength and to a lesser degree.

General specification
Hardness by Shore A Hardness shore D 60±3 SHORE ISO 868
Temperature resistance °С Min. service temperature -200 C° / Max. service temperature 260 C°
Size Diameter: 10x5 ÷ 360x150 mm, Length: 1000, 2000 mm;
Color Dark Grey
Technical datasheet

 PTFE bushings - 15% Graphite Filled

Write a review

Note: HTML is not translated!
    Bad           Good

PTFE bushings - 15% Graphite Filled

    Italy
  • Brand: Italy
  • Product Code: PTFE bushings - 15% Graphite Filled
  • Availability: On stock

Available Options


Related Products

PTFE bushings - 25% glass filled

PTFE bushings - 25% glass filled

PTFE bushings - 25% glass filled Adding glass to PTFE bushings makes it stronger and more durable, as well as reducing flexibility and likelihood of creep. Glass filled PTFE bushings can operate at the same temperature range as virgin PTFE and is similarly chemically inert. Glass has little effect on most of PTFE's electrical or chemical properties. It is resistant to acids and oxidation, but alkali can attack it.  Glass in the form of short glass fibers is usually ..

0.00€ Ex Tax: 0.00€

PTFE bushings - 15% Glass + 5% MoS2 Filled

PTFE bushings - 15% Glass + 5% MoS2 Filled

PTFE bushings - 15% Glass + 5% MoS2 Filled This kind of PTFE bushings is filled with 15% Glass and 5% MoS2 Fillers. Often used together with glass or bronze, Molybdenum disulfide (MoS2) as a PTFE filler results in a more slippery and harder material. MoS2 also improves compression and wear resistance. MoS2 as one of the best known dry lubricants can improve surface strength and lower friction and wear rate coefficient, while the glass fibers provide structural stren..

0.00€ Ex Tax: 0.00€

PTFE bushings - 40% Bronze filled

PTFE bushings - 40% Bronze filled

PTFE bushings - 40% Bronze filled We are producer and distributor of these 40 percent Bronze Filled PTFE bushings. Bronze and PTFE additives enhance creep tolerance, thermal conductivity, and wear resistance while maintaining low friction properties. If good thermal and electrical conductivity is required in your application, bronze-filled PTFE bushings may be ideal. It also increases wear resistance by adding bronze to PTFE. Bronze, however, counteracts the PTFE's n..

0.00€ Ex Tax: 0.00€

PTFE bushings - 25% Carbon Filled

PTFE bushings - 25% Carbon Filled

PTFE bushings - 25% Carbon Filled Carbon-filled PTFE bushings benefit from increased compressive strength, decreased deformation during heavy loads, and greater tolerance to wear than virgin PTFE. Since carbon is conductive, it is ideal for PTFE bushings requiring higher thermal conductivity than PTFE itself, and because of its electrical conductivity it can become static dissipative. Carbon in the form of powder or fiber may be added. It may be abrasive, but not as muc..

0.00€ Ex Tax: 0.00€

PTFE bushings - 10% PEEK filled

PTFE bushings - 10% PEEK filled

PTFE bushings - 10% PEEK filled The offered filled PTFE bushings with PEEK are a high modulus material with excellent high temperature resistance. Excellent for back-up rings only. PEEK filled PTFE bushings contains of 90% PTFE virgin material and 10% PEEK. It is available in cream colour and comes in a hardness of 60 shore D. This material is comparable to PTFE Ekonol, but it is approved by FDA-CFR 21.177.1550, as well as FDA-CFR 21-177.2415 compliant and meets the 10/..

0.00€ Ex Tax: 0.00€

PTFE bushings - 55% Bronze + 5% MoS2 filled

PTFE bushings - 55% Bronze + 5% MoS2 filled

PTFE bushings - 55% Bronze + 5% MoS2 filled We are producer and distributor of these 55 percent Bronze  and 5% MoS2 Filled PTFE bushings. Bronze and MoS2 as PTFE additives enhance creep tolerance, thermal conductivity, and wear resistance while maintaining low friction properties. 55% Bronze + 5% MoS2 filled PTFE has better wear, creep resistance, and higher thermal conductivity than glass fiber with PTFE. The compound is easily machined, but has good to average chemica..

0.00€ Ex Tax: 0.00€

PTFE bushings - Stainless Steel filled

PTFE bushings - Stainless Steel filled

PTFE bushings - Stainless Steel filled Stainless steel supplies high wear resistance and load bearing capability, along with better chemical resistance than bronze-filled PTFE. Stainless steel filled PTFE is especially good in steam service. PTFE receives increased strength and the ability to withstand loads by adding stainless steel material. PTFE bushings - Stainless Steel filled works great at higher temperatures, making PTFE filled with stainless steel a great o..

0.00€ Ex Tax: 0.00€

PTFE bushings - Virgin PTFE

PTFE bushings - Virgin PTFE

PTFE bushings - Virgin PTFE The Virgin PTFE is an Extremely Multifunctional material with a wide variety of applications. The Virgin PTFE is one of the most chemically inert materials found which is used in many different sectors and applications in the form of PTFE bushings and PTFE thick wall tubes. With a wide range of applications, PTFE is an extremely versatile material. It has significant chemical resistance, a wide spectrum of temperature, is totally unaffected b..

0.00€ Ex Tax: 0.00€

Tags: PTFE bushings, 15% Graphite Filled