Nuova Fima
Food industry pressure gauge type OM
OM Homogenizer Pressure gauges for the food industry with dimensions DS 4” (100mm). These food industry pressure gauges are designed for homogenizer machines and are built according to standard n. 74-06 of 3-A organization (Sanitary Standards Symbol Administrative Council). The absence of interstices and the mirror finishing of the components assure the best hygiene. The process connection is a special diaphragm seal integrally built with the pressure gauge. To reduce th..
0.00€
Intrinsically safe pressure transmitter, ATEX version - SX 09
SX 09 is Intrinsically safe pressure transmitter in ATEX version. The ATEX protected pressure transmitter has ignition protection Ex ia as per EN 60079-0, EN 60079-11, EN 60079-26, atmosphere type GD:- category 1 (1), marking II 1 GD Ex ia IIC Ex ia IIIC (cod. 1GD);- category 1/2, marking II 1/2 GD Ex ia IIC Ex ia IIIC (cod. 2GD).✔ Zones : 0, 1, 2, 20, 21, 22✔ EMC emission and immunity: as per EN 61326.✔ Case: with ventilation device.✔ Calibration: adjustable.Industrial ..
0.00€
Liquid filled - industrial pressure gauge - type MGS10 DN100
MGS10 DN100 pressure gauge is a Bourdon tube measuring instrument in anti-vibration heavy duty version DS 4” (100mm)Liquid filled pressure gauges are designed for use on power units, pumps, hydro-cleaning machines, presses, engine compressors, turbines, diesel engines, chemical, petrochemical and refrigerating plants and on machines and equipment where pulsating pressures or mechanical vibrations are apparent. They can be used with gaseous or liquid media which do not co..
0.00€
Liquid filled - industrial pressure gauge - type MGS10 DN50
MGS10 DN50 is a liquid filled pressure gauge of Bourdon tube type in an anti-vibration version DS 2” (50mm).Liquid filled pressure gauges are designed for use on power units, pumps, hydro-cleaning machines, presses, engine compressors, turbines, diesel engines, chemical, petrochemical and refrigerating plants and on machines and equipment where pulsating pressures or mechanical vibrations are apparent. They can be used with gaseous or liquid media which do not corrode copper ..
0.00€
Liquid filled - industrial pressure gauge - type MGS10 DN63
MGS10 DN63 is a liquid filled pressure gauge from Bourdon tube in anti-vibration version DS 2.5” (63mm) . Liquid filled pressure gauges of this type are designed for use on power units, pump, hydro-cleaning machines, presses, engine compressors, turbines, diesel engines, refrigerating plants and on machines and equipment where pulsating pressures or mechanical vibrations are apparent. The pressure gauges with liquid can be used with gaseous or liquid media which do not corrod..
0.00€
Liquid filled - industrial pressure gauge - type MS4 DN100
MS4 DN100 is a liquid filled pressure gauge of Bourdon tube type in anti-vibration version DS 4” (100mm). Pressure gauges with liquid are designed for use on power units, pump, hydro-cleaning machines, presses, engine compressors, turbines, diesel engines, chemical, petrochemical and refrigerating plants and on machines and equipment where pulsating pressures or mechanical vibrations are apparent. The liquid filled industrial pressure gauges can be used with gaseous or l..
0.00€
Oil industry pressure gauge type MGS36 DN100-150
MGS36 DN100-150 are Bourdon tube pressure gauges compliant with NACE MR0103/MR0175 – ISO 15156-3 version with size of DS 4”, 6” (100-150mm). These special pressure gauges are designed for the petrochemical industry. The oil industry pressure gauges are built to resist to the most severe conditions created by H2S, by the environment and for those fluids, which have high viscosity and do not crystallize. The quality of the materials used to build the sensible element allows the..
0.00€
Pressure transmitter with local readout MT 18 DN100
Pressure transmitter with local readout DS 4” (100mm) type - MT 18 DN100.A pressure transducer, often called a pressure transmitter, is a transducer that converts pressure into an analog electrical signal. MT 18 DN100 pressure transmitter has a local display, mounted on a sensor with a two wire 4 to 20mA signal running out to measure the pressure. Pressure transducers MT 18 DN100 are generally available with three types of electrical output; millivolt, amp..
0.00€
Pressure transmitter with local readout MT OM DN100 - for homgenizers
MT OM DN100 is a pressure transmitter with local readout, for homogenizers with display size of DS 4” (100mm). It can be used in the food and beverage industry.✔ Construction and finishing: as per 74-06.✔ The pressure transmitter of this type has a sterilization temperature: +150°C max.✔ Double elastic element: The pressure transmitters for homogenizers of this type are made with Bourdon tube and electronic sensor.✔ This pressure transmitter is Vibrations and ..
0.00€
Process industry pressure gauge type MGS18 DN100-150
The pressure gauge for the process industry type MGS18 DN100-150 is a kind of bourdon tube pressure gauge, all stainless steel construction DS 4”, 6” (100-150mm).These pressure gauges are designed for chemical, petrochemical industries and for conventional power plants. They are built to resist to the most severe conditions created by the process medium and by the environment and for those fluids, which have high viscosity and do not crystallize. The quality of the materials ..
0.00€
Process industry pressure gauge type MGS18 DN40-50
Pressure gauge MGS18 DN40-50 is a Bourdon tube pressure gauge with all stainless steel construction DS 1.5”, 2” (40-50 mm).These instruments are designed for use in chemical and petrochemical processing industries, and in conventional power plants, to measure gaseous or liquid media which do not have high viscosity or do not crystallize. They are built to resist the most severe operating conditions created by the ambient environment and the process medium. For ..
0.00€
Process industry pressure gauge type MGS18 DN63
MGS18 DN63 - Bourdon tube pressure gauge all stainless steel construction DS 2.5” (63mm)These instruments are designed for use in chemical and petrochemical processing industries, and in conventional power plants, to measure gaseous or liquid media which do not have high viscosity or do not cristalize. They are built to resist the most severe operating conditions created by the ambient environment and the process medium. For use on power units, pumps, hydro-cleani..
0.00€
Process industry pressure gauge type MGS19 DN100-150
MGS19 DN100-150 are Bourdon tube pressure gauges type HEAVY WORK DS 4”, 6” (100-150mm).These pressure gauges are designed for use in chemical and petrochemical processing industries, and in conventional power plants. They are built to resist the most severe operating conditions created by the ambient environment and the process medium. The high strength of the sensing element makes these pressure gauges suitable to withstand high overpressure up to 4 times the ..
0.00€
Process industry pressure gauge type MGS20 DN100-150
MGS20 DN100-150 are safety pressure gauges for the process industry, with ”solid-front“ made entirely of stainless steel construction with dimensions DS 4”, 6” (100-150mm).These instruments are built in conformity with the construction and safety specifications of EN 837-1/S3 e ASME B40.1. In case of leaks or break of the elastic element, the operator is protected by a solid separating wall placed on the front of the instrument and by the blow out back. They are usu..
0.00€
Process industry pressure gauge type MGS20 DN63
MGS20 DN63 Bourdon tube ”solid-front“ pressure gauges all stainless steel construction DS 2.5” (63mm). These Solid-Front instruments are built in accordance with safety specifications of EN 837-1 “S3” and ASME B40.1.The safety construction consists of a solid separating wall in stainless steel, placed between the scale and the elastic element and a blow out back which is released from the case whenever an internal pressure, due to leaks, is created or the elastic el..
0.00€
Process industry pressure gauge type MGS21 DN100-150
MGS21 DN100-150 Bourdon tube “solid-front” pressure gauges HEAVY WORK DS 4”, 6” (100-150mm). These instruments are designed for use in chemical and petrochemical processing industries, and in conventional power plants.This pressure gauge is built to resist the most severe operating conditions created by the ambient environment and the process medium.The high strength of the sensing element makes these pressure gauges suitable to withstand high overpressure up t..
0.00€
Process industry pressure gauge type MGS22 DN100-150
MGS22 DN100-150 safety pressure gauges ”solid-front“ for the process industry are made entirely of stainless steel and are dedicated for high pressures with size of DS 4”, 6” (100-150mm). These instruments are built in conformity with the construction and safety specifications of EN 837-1/S3 e ASME B40.1. In case of leaks or break of the elastic element, the operator is protected by a solid separating wall placed on the front of the instrume..
0.00€
Process industry pressure gauge type MGS30 DN125
Bourdon tube “solid-front” pressure gauges turret case DS 4.5” (125 mm). These instruments are built in conformity with the construction and safety specifications of ASME B40.1. In case of leaks or break of the elastic element the operator is protected by a stainless steel safety cell solid front and by the blow-out back. They are usually used in the chemical, petrochemical industries and in conventional power plants. The TIG welding between the safety cell and the proce..
0.00€
Process industry pressure gauge type MGS30/EXTRA DN125
These pressure gauge instruments are built in accordance with safety specifications ASME B40.1, UNI-EN 837-2. The safety construction consists of a stainless steel “solid-front” safety cell placed behind the scale, which welding to socket gives to instrument an exceptional strength. Whenever, due to leaks, an internal pressure is created or the elastic element is broken the safety cell protects the front and sides, meanwhile the blow out back is released from the case. T..
0.00€
Process industry pressure gauge type MGS32 DN125
These pressure gauges of type MGS32 DN125 are built in conformity with the construction and safety specifications of ASME B40.1. In case of leaks or break of the elastic element the operator is protected by a stainless steel safety cell solid front and by the blow-out back. They are mainly used on high pressure water jet technology like water cutting machines, hydro blasting pumps and turbines, hydrodemolition.The TIG welding between the safety cell and the process ..
0.00€