Pipes of Polyacetal / POM
The most common polyacetal type is polyoxymethylene (POM) which is also called polyformaldehyde or acetal. We offer POM-C pipes or tubes from this highly crystalline thermoplastic, known for its high resistance to flexural and tensile strength, stiffness, hardness, and low stress creep.
The polyacetal POM-C pipes also have a low friction coefficient, outstanding chemical tolerance, and extraordinary properties of fatigue, but only modest heat s..
Polyacetal / POM-C Rods
The POM material, commonly called acetal (chemically known as Polyoxymethylene)has a copolymer named POM-C Polyacetal plastic. It has a continuous working temperature that varies from -40 ° C to +100 ° C.
There is no tendency to stress cracking based on the toughness of POM-C polyacetal rods, combined with high dimensional stability. The POM-C Polyacetal copolymer has high thermal stability and resistance to chemical agents.
Sheets of Polyacetal / POM-C
Polyacetal sheets / POM-C have great Pressure tested quality and High strength and stiffness. The POM-C sheets offer High rigidity (to -40 °C) and High thermal stability. They have Low water absorption and High dimension stability. POM-C sheets have good electrical insulating properties and very good sliding properties.
POM-C Polyacetal sheets have high resistance to solvents and very high resistance to stress cracks.
POM-C Polyacetal rods - medical grade
Acetal C Medical Grade Rod is a medical-grade engineering product conforming to the requirements specified by the American Food and Drug Administration (FDA) and its code Federal Regulations, CFR 21. It has also been fully assessed for biocompatibility according to U.S. Pharmacopia (USP) Class VI and ISO 10993.
Acetal C Medical Grade Rod is sterilizable with hot steam, plasma as well as ethylene oxide. Acetal C Medical Grade Rod is ..
POM-H Polyacetal rods - Delrin
Acetal H (Delrin) Extruded Black Rod is a homopolymer manufactured from Delrin resin. Delrin is a semi-crystalline, thermoplastic with product characteristics including excellent dimensional stability, low moisture absorption, and high wear resistance.
POM-H rods offer slightly higher tensile and impact strength in comparison to Acetal Copolymer Rod. (Natural Delrin rod conforms to FDA21 CFR 177.2470). The long term service temperature ran..
Sheets of Polyacetal / POM-H
Polyacetal POM-H sheets are made of a semycristal thermoplastic plastic having high strength, rigidity, and hardness comparable to polyamide, but it has several advantages over them. In comparison with the polyamide, POM-H does not absorb moisture, and therefore, the properties and remain stable in a humid environment, and the linear dimensions unchanged.
Polyacetal sheets type POM-H inherent in very good slip, abrasion resistance, good..
POM-C Polyacetal rods - 10% PTFE filled
The offered plastic is 10% PTFE filled POM-C copolymer engineered to improve the sliding friction properties of the material. The PTFE is dispersed homogeneously in the POM-C acetal material and this results in an increased coefficient of slide-friction and abrasion resistance combined with reduced sensitivity to stick-slip effects.
Furthermore, the PTFE filled POM-C provides good creep strength and extremely good dimensional stab..
Acetal C 10% PE Filled Light Blue Sheet
Acetal C 10% PE Filled Light Blue Sheet is a high performance engineering plastic with product characteristics including excellent sliding properties, high dimensional stability and FDA Food Approval (177.2470/177.1520/178.2010). Meets FDA standards and is USDA approved.
The long term service temperature range of Acetal C Sheet is from -40°C to 100°C. Properties include low friction, high wear resistance, and..