PTFE Sheets

Polytetrafluoroethylene (PTFE) is a versatile polymer used in a broad range of medical, industrial, and high technology applications. The PTFE sheets are inert, making the products produced from them unreactive to most chemicals, and, it can work in high processing and operating temperature environments (500°F / 260°C continuous).

Our PTFE Sheets offers excellent thermal, electrical, mechanical, and chemical properties as well as superior control over pore size, permeability, water entry pressure, and thickness. PTFE sheet is an ideal choice for a wide variety of demanding applications requiring one or a combination of these exceptional properties. 


PTFE Sheets

PTFE Sheets

PTFE sheets Virgin PTFE sheet, frequently misidentified as Teflon sheet, is a high performance thermoplastic with a very low moisture absorption rate, an incredibly low coefficient of friction, and good dielectric strength.   PTFE sheet is made of a fluoropolymer with low friction and exceptional chemical and weather resistance.   PTFE sheets are available in various sizes and thicknesses ranging from 6 to 150 mm. For thickness smaller ..

PTFE + 15% carbon fibers sheets

PTFE + 15% carbon fibers sheets

PTFE + 15% carbon fibers sheets PTFE sheets with filler 15% carbon fibers  (85% virgin ptfe + 15% carbon fibers) Carbon PTFE Sheet has good chemical resistance to corrosive environments. It exhibits good initial wear and rubbing or sliding contact characteristics, both dry and water applications. Carbon-filled PTFE sheets are frequently used for piston rings to reduce cylinder wall wear by entrapping abrasive foreign particles in their relatively soft surfaces. ..

PTFE + 15% Glass + 5% graphite Sheets

PTFE + 15% Glass + 5% graphite Sheets

PTFE sheets with filler 15% glass + 5% graphite content (80% virgin ptfe + 15% glass fibres + 5% graphite) Properties: Excellent chemical stability Better thermal conductivity and coefficient of friction Improved compression and wear resistance Self lubricating properties specially at starting point. Main applications: 15% Glass + 5 % Graphite filled PTFE is used in dynamic seal applications with rotating and alternating movements Pneum..

PTFE + 15% Glass Sheets

PTFE + 15% Glass Sheets

PTFE sheets with 15% glass (85% virgin ptfe + 15% glass fibres) Properties: Improved compression  and  wear resistance;  excellent chemical stability.  Better thermal conductivity and coefficient of friction when combined with Mos2 or Graphite. Main applications: • It is the most commonly used filler for dynamic seal applications where both rotating and alternating movements are involved, pneumatic, hydraulic and mechanical parts. Statement on suitabil..

PTFE + 25% Glass Sheets

PTFE + 25% Glass Sheets

PTFE sheets with 25% glass (75% virgin ptfe + 25% glass fibres) Properties: • Improved compression  and  wear resistance;  excellent chemical stability.  Better thermal conductivity and coefficient of friction when combined with Mos2 or Graphite. Main applications: • It is the most commonly used filler for dynamic seal applications where both rotating and alternating movements are involved, pneumatic, hydraulic and mechanical parts. Statement on suitability..

Showing 1 to 5 of 5 (1 Pages)