WEICON Urethane-80 is liquid resin for elastic molding and protective coating based on polyurethane, provides very high impact resistance and wear resistance.

 

Urethanes are suitable for casting. They are non-shrink compounds, used in the manufacture of new or customized rubber products, as well as for flexible forms. WEICON Urethane-80 can be used to repair worn or damaged rubber equipment parts, to create a protective coating in a very intensive abrasion, as well as to recover items that are subject to wear, vibration, shock and dynamic loads.

These repair products have good adhesion to metal, rubber, concrete, fiberglass, wood and many other materials. They are easily applied by a trowel, brush or gun and cure rapidly to form a solid "rubber-like" compounds, which have excellent tensile strength and resistance to abrasion.

 

• The two components are mixed and applied easily.
• For the formation of fine details, it does not change shape during curing.
• It cures at room temperature.
• It returned to its original shape without deformation.
• Slight shrinkage.
• Glues metals, concrete, wood, rubber, glass.

• Conveyor belts
• Solid rubber tyres
• Conveyor rollers

• Rollers
• Centrifuges
• Polishing drums
• Tanks
• Chutes and funnels
• Pumps
• Bulk containers
• Dry and wet mixers
• Cyclones
• Housings
• Loading areas

In addition, WEICON Urethanes are excellently suitable as vibration or insulation protection of machines. Various types are available:  Urethane 45, Urethane 60 and Urethane 80 (see Brochure/Technical Data).

 

The surfaces must be clean, dry and degreased. Almost every surface soiling like oil, grease, dust and dirt can be removed with WEICON Surface Cleaner or WEICON Sealant and Adhesive Remover (old paint residues). If the surfaces are badly soiled or smooth, the adhesion can be optimized by sand-blasting with suitable grain size or by mechanical roughening.