Application  

Triple-eccentric butterfly valves are industrial valves, which are designed to fully open or close a passage of the working medium flowing through a pipeline. They can also be used for flow-control purposes. However, a 100% tightness of the valve cannot be guaranteed in a long-term use for control purposes. 


TDS

Working medium  

 

  • waste and service water  
  • drinking water  
  • hot water  
  • steam  
  • non-aggressive liquids and gases  
  • (natural gas, CO-gas, petroleum products, etc.)  

 

Butterfly valves is possible to deliver with surface protection which is done by coverage with plastic material (rilsan, halar). This surface protection together with the use of stainless steel material is widening the usage of butterfly valves for chemically aggressive or abrasive media and sea water.

 

Maximum working temperature:

 

A maximum working temperature of the butterfly valve is +400 °C, by agreement up to +550 °C and depends on the body material used.

 


 

 

Operation

  • manual gear-box
  • electric actuator
  • pneumatic or hydraulic actuator
  • remote control from stand
Testing
The valves are tested according to EN 12 266-1, EN 12 266-2,  EN 13 3060-2.
 
Connection to piping
  • wafer type acc. to EN 1092-1, face to face dimensions acc. to EN 558-1, Series 16, 20, 25 
  • flanged ends acc. to EN 1092-1, face to face dimensions acc. to EN 558-1, Series 13, 14, 16 
  • welded ends acc. to ČSN 13 1075, EN 12 627, face to face dimensions acc. to EN 558-1, Series 14 Other face to face and connecting dimensions are acc. to the customer´s requierement, e.g. GOST, ANSI.
Installation
The butterfly valves can be mounted into horizontal, vertical or inclined pipeline so that the arrow stamped on the valve body corresponds with the direction of the tightness (arrow points from higher pressure to lower when the disc is closed), and the rotating axe of the disc is in a horizontal position. The bolt type at the pivot area is also very important. When there is a butterfly valve with electric actuator it is important to abide the actuator’s manufacturer.
 

 

Valves Specification
Actuation Electric actuator, Pneumatic or hydraulic actuator, gear-box, ISO top-flange;
Connection wafer type;
DN: 150, 200, 250, 300, 350, 400, 450, 500, 600
PN: 16,25,40;
Seal Material Graphite
Tmax 400 °C
Valve Type L32.8;
General specification
Applications: Triple-eccentric butterfly valves are industrial valves, which are designed to fully open or close a passage of the working medium flowing through a pipeline. They can also be used for flow-control purposes. However, a 100% tightness of the valve cannot be guaranteed in a long-term use for control purposes.

Applications

  • Industrial Processes
  • Oil & Gas Applications
  • HVAC Systems

FAQ

What materials are used in the construction of the valve?
The valve is typically constructed from high-quality stainless steel or carbon steel, ensuring durability and resistance to corrosion.
What is the pressure rating of the valve?
The valve is designed to operate under high pressure, with a typical rating of up to 150 psi, depending on the specific model.
How is the valve installed in a pipeline?
The valve can be installed using standard flanged connections, ensuring a secure fit within the pipeline system.
EXPERT ADVICE: Ensure proper alignment during installation to prevent leakage and ensure optimal performance of the valve.

Write a review

Note: HTML is not translated!
    Bad           Good

Triple-Eccentric Butterfly Valve

    Czech Republic
  • Brand: Czech Republic
  • Product Code: Triple-Eccentric Butterfly Valve - Wafer type
  • Availability: ✅On stock

Available Options


0 reviews / Write a review

From: 16.00 € (Ref. price)

Related Products

Single-Eccentric Butterfly Valve

Single-Eccentric Butterfly Valve

Application   Single-eccentric butterfly valves are industrial valves, which are designed to fully open or close a passage of the working medium flowing through a pipeline. They can also be used for flow-control purposes. However, a 100% tightness of the valve cannot be guaranteed in a long-term use for control purposes.  TDS Working medium     waste and service water   drinking water   hot water   steam   non-aggressive liquids and gases  ..

Double-Eccentric Butterfly Valve

Double-Eccentric Butterfly Valve

Application   Double-eccentric butterfly valves are industrial valves, which are designed to fully open or close a passage of the working medium flowing through a pipeline. They can also be used for flow-control purposes. However, a 100% tightness of the valve cannot be guaranteed in a long-term use for control purposes.  Working medium   waste and service water   drinking water   hot water   steam   non-aggressive liquids and gases   (natura..

Triple-Eccentric Butterfly Valve Flanged type

Triple-Eccentric Butterfly Valve Flanged type

Application  Triple-eccentric flanged butterfly valves are industrial valves, which are designed to fully open or close a passage of the working medium flowing through a pipeline. They can also be used for flow-control purposes. However, a 100% tightness of the valve cannot be guaranteed in a long-term use for control purposes. TDSWorking medium  waste and service water  drinking water  hot water  steam  non-aggressive ..

Butterfly Valve for drinking water

Butterfly Valve for drinking water

Butterfly Valve for drinking waterbody: grey cast iron GG 25 protected with epoxide coatingdisc:  brass or ductile cast iron protected with epoxide coatingliner:  EPDM / NBR spindle:  nerez, 13% Cr / 13% Cr stainless steelshaft:  nerez, 13% Cr / 13% Cr stainless steelbushing:  delrinTDS..

Tags: Triple-Eccentric, Butterfly, Valve