Application:
- heating plant main pipeline routes,
- heating pipeline crossings,
- heat exchanger stations
Working medium:
• the ball valves for steam are used also with hot water and medium of group 2 (water, air, gas) in the following conditions: a pressure less than 4.0 MPa and temperature less than +200 °C (depending on the pressure temperature diagram)
• steam at a temperature to +250 °C (on request up to 300 °C)
CONNECTION
- flanges according to CSN EN1092-1 Form B, others according to request
| Positon | Description | Material |
|---|---|---|
| 1. | Ball | X5CrNi18-10 |
| 2. | Seat | PTFE+20%C |
| 3. | Ring | X5CrNo18-10 |
| 4. | Spring | 50CrV4 |
| 5. | Connector pipe | P355N |
| 6. | Flange | P355N |
| 7. | Body | P355N |
| 8. | Chimney | P355N |
| 9. | Plug | X8CrNiS18-9 |
| 10. | Lower Ring | PTFE+20%C |
| 11. | Packing | Graphite |
| 12. | Upper ring | X20Cr13 |
| 13. | Gland | X20Cr13 |
| 14. | Lever | S235JR |
| 15. | Screw | Steel |
Chart of main Dimensions
| DN | PN | dk | Dz | D1 | D0 | d0 | N | g | f | L-2at | L-ct | L-2gt | I | H | s | Kvs | Weight |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 15 | 16-40 | 15 | 95 | 47 | 65 | 14 | 4 | 16 | 2 | 130 | 230 | 102,5 | 140 | 70 | oválný otvor d1=6,5 / d2=10 | 9,8 | 9,8 |
| 20 | 16-40 | 20 | 105 | 47 | 75 | 14 | 4 | 18 | 2 | 150 | 230 | 112,5 | 140 | 70 | oválný otvor d1=6,5 / d2=10 | 16,2 | 16,2 |
| 25 | 16-40 | 25 | 115 | 68 | 85 | 14 | 4 | 18 | 2 |
| Valves Specification | |
| Actuation | Electric actuator, Pneumatic or hydraulic actuator, gear-box, ISO top-flange; hand lever |
| Connection | flanges |
| DN: | 10, 15, 20, 25, 32, 40, 50, 65, 80, 100, 125, 150, 200 |
| PN: | 16, 25, 40 |
| Seal Material | R-PTFE |
| Tmax | 250 °C |
| General specification | |
| Material: | carbon steel P355N |
| Applications: | The flanged steam ball valves are steel stop valves intended to be used to fully close or fully open the flow of the medium conveyed. The steam ball valves with flanges can not be used for flow throttle or flow control purposes. Special types of these ball valves have been developed for flow control purposes. Owing to their features, the steam ball valves can satisfy the duty of a shutting element in any heating plant system |
Applications
- Industrial Systems
- Heat Distribution
- Oil and Gas Applications
FAQ
What materials are the flanged steam ball valves made of?
What is the operational range of these valves?
How should the flanged steam ball valves be installed?
Steam Ball Valve - Full Bore, Flanged
- Brand: Czech Republic
- Product Code: Steam Ball Valve - flanged, full bore
- Availability: ✅On stock
Available Options
Related Products
Stainless Ball Valve - 3 pieces - threaded
Stainless Ball Valve - 3 pieces - threaded Application: The stainless ball valves from 3 pieces are designed to be used as shut-off valves for corrosive and non-corrosive liquids, gases, vapours and loose materials. Medium may flow in both directions through the ball valves. Thanks to their simple design and reliable function, the ball valves can be used in food, chemical, petrochemical and pharmaceutical industries, in sewage and water treatment plants, etc. TDS Tech..
Stainless Ball Valve - one piece - Wafer
Stainless Ball Valve - one piece - Flanged Application: The stainless ball valves from 1 piecе is designed to be used as shut-off valves for corrosive and non-corrosive liquids, gases, vapours and loose materials. Medium may flow in both directions through the ball valves. Thanks to their simple design and reliable function, the ball valves made of one piece can be used in food, chemical, petrochemical and pharmaceutical industries, in sewage and water treatment pla..
Stainless Ball Valve - 3 pieces - flanged
Stainless Ball Valve - 3 pieces - flanged Application: The flanged stainless ball valves from 3 pieces are designed to be used as shut-off valves for corrosive and non-corrosive liquids, gases, vapours and loose materials. Medium may fl ow in both directions through the ball valves. Thanks to their simple design and reliable function, the ball valves can be used in food, chemical, petrochemical and pharmaceutical industries, in sewage and water treatment plants, etc. T..
Steam Ball Valve
Application:The steam ball valves are steel stop valves intended to be used to fully close or fully open the flow of the steam conveyed. The steam ball valves can not be used for flow throttle or flow control purposes. Special types of these steam ball valves have been developed for flow controll purposes. Owing to their features, the steam ball valves can satisfy the duty of a shutting element in any heating plant system such as:• heating plant main pipel..
Stainless Ball Valve - 1 piece - threaded
Stainless Ball Valve - 1 piece - threaded Housing and ball made of 1.4408. Sealing material PTFE, for screw pin to DIN 3852 Part 2 Form A. Investment casting, hexagon, reduced bore, with lever. Parallel BSP thread to DIN/ISO 228 Application: The stainless ball valves from 1 pieces are designed to be used as shut-off valves for corrosive and non-corrosive liquids, gases, vapours and loose materials. Technical description: T max = 260 C ..
Three Piece Stainless Ball Valve - welding ends
Three Piece Stainless Ball Valve - welding ends Open passage Welding ends on both sides. Housing and ball made of 1.4408. Sealing material PTFE / glass fibre 15%. S: Length conforms to DIN 3202 S13..
Three Piece Stainless Ball Valve - welding ends for tubes to DIN 11866 Series B
Three Piece Stainless Ball Valve - welding ends Open passage Welding ends on both sides. Housing and ball made of 1.4408. Sealing material PTFE / glass fibre 15%. S: Length conforms to DIN 3202 S13..
Gas Ball Valve - welding ends
Gas Ball Valve - welding ends APPLICATION Gas systems (media of group 1 according to the Directive 97/23 EC - category GDII), natural gas, petrochemical products and oil derivates. For the version WKP 2cPB: propane, calor gas and propane-butane. TEMPERATURE RANGE -30°C to +60°C for explosive fluids (natural gas, propane, calor gas, propane-butane, acetylene etc.) -30°C to +110°C for other fluids (carbon dioxide, hot gases, amonia etc.) CONNECTION ..
Steam Ball Valve - carbon steel - PN40 - flanged
Series WKC4dc - Carbon steel P235GH + Zn – ball valve – Wafer type - PN40 Dimensions: Size : DN 10 to DN 40 Ends : EN 1092-1 B1 Flanges Specifications: Carbon steel ball valve : Min Temperature : -20°C Carbon steel ball valve : Max Temperature :+ 250°C Max Pressure : 40 Bars Specifications : Full bore Hollow stainless ball from DN 10 to DN 40 Limiter: Yes Construction: fully welded body Materials : Body: Carbon steeel P235GH + Zn body Sphere: Stainless S..
Steam Ball Valve - carbon steel - PN40 - welding ends
Series WKC4c + WKC6c - Carbon steel P235GH + Zn – ball valve – welding ends - PN40 Dimensions: Size : DN 15 to DN 250 Ends : Welding ends – Edge-to-Edge lengths acc. to: PN-EN 12982 Specifications: Carbon steel ball valve : Min Temperature : -20°C Carbon steel ball valve : Max Temperature :+ 250°C Max Pressure : 40 Bars Specifications : Full bore Hollow stainless ball from DN 15 to DN 250 Limiter: Yes Construction: fully welded body Materials : Body: Carb..