SLF Knife Gate Valve
Our SLV and SLF knife gate valves are particularly appropriate for abrasive and challenging slurry where quality of operation and low life cycle costs are highlighted.
The SLV is a lugged variant whereas the SLF is fully flanged and particularly appropriate for old non-centered tubes or apps with low stress.
Nominal diameter:
DN 80 - DN 400
Face-to-face:
manufacturing standard
Flange accommodation:
- EN 1092 PN 10
- ASME/ANSI B16.5 Class 150
- AS 2129 Table D
- AS 2129 Table E
Tightness check:
EN 12266-1:2012 rate A
Max. Operating pressure:
DN 80 - DN 400, 10 bar
| General specification | |
| Technical datasheet | SLF Knife Gate Valve |
Our SLV and SLF knife gate valves are particularly appropriate for abrasive and challenging slurry where quality of operation and low life cycle costs are highlighted.
The SLV is a lugged variant whereas the SLF is fully flanged and particularly appropriate for old non-centered tubes or apps with low stress.
Applications
- Industrial Processes
- Chemical Handling
- Oil & Gas Applications
FAQ
What is the nominal diameter range of the SLF Knife Gate Valve?
What is the face-to-face manufacturing standard for this valve?
What applications are best suited for the SLF Knife Gate Valve?
SLF Knife Gate Valve
- Brand: Germany
- Product Code: SLF Knife Gate Valve
- Availability: On stock
Available Options
Related Products
MV Universally applicable Knife Gate Valve
MV Universally applicable Knife Gate Valve The knife gate valve MV is used in many application areas. The valve has a bevel edge door that cuts through various media efficiently. The gate is pressed onto the seat in a closed position, giving a narrow and safe seal. This unique shut-off method makes the MV valve appropriate for liquids as well as for dry media such as pulp, sludge, biomass, dust and various waste types. Nominal diameter: DN 50 - DN 1600 Face-to-face: Co..
JT Knife Gate Valve
Junk Trap Knife Gate Valve This Junk Trap knife gate valve is intended to handle hard and abrasive media under very hard process circumstances. The JT knife gate valve is intended specifically to minimize turbulence, erosive wear and solid build-up. The Junc Trap consists of the inlet side of RKO gate valve with a curved inlet and a rectangular outlet. The rectangular outlet side of the JTV valve is mounted on the quadratic and conic-shaped reject tank in an upright pla..
SLV Knife Gate Valve for abrasive slurry
SLV Knife Gate Valve for abrasive slurry Our SLV and SLF knife gate valves are particularly appropriate for abrasive and challenging slurry where quality of operation and low life cycle costs are highlighted. The SLV is a lugged variant whereas the SLF is fully flanged and particularly appropriate for ancient non-centered tubes or apps with low stress. Nominal diameter: DN 50 - DN 900 Face-to-face: manufacturing standard Flange accommodation: EN 1092 PN 10 A..
SLX High pressure knife gate valve
SLX High pressure knife gate valve The knife gate valves SLH and SLX are designed for the most demanding high pressure applications with slurry and other abrasive media where operation reliability and low life cycle cost are emphasized. The SLH is designed for pressure up 20 bar/290 psi while the SLX is designed for 50 bar/720 psi. Once these valves are activated, their seats form narrow expansion and no metal component of the valve comes in direct contact with the medium...
TV Knife Gate Valve
TV Knife Gate Valve The knife gate valve TV is used as an isolation valve for a transmitter or sensor on a tank for which a short face-to-face length is required. The gate valve arrives with in a stainless steel valve body, gate and retainer rings. Several seat materials are available and the retainer ring system leads to very cost-efficient servicing. The knife gate valve can be installed straight on the tank wall and the transmitter can be removed without flooding the ta..