Considered an excellent substitute for asbestos, Rubberglass packing is braided with 4 diagonals and is entirely produced with special high quality glass yarns impregnated yarn by yarn with special polymers. It is extremely hard and compact.
This buffer has been designed to achieve the best results taking into account the type of system used and the operating variables, which are:
- Line speed
- Filament dimensions
- Uniform zinc coating
- Homogeneous distribution / zinc saving
- Buffer duration
APPLICATIONS
Buffers for wire-drawing. These are used in wire- drawing in the procedure of galvanisation by hot immersion in zinc.
| General specification | |
| Material: | glass fibers, rubber, special coating |
| Applications: | Buffers for wire-drawing. These are used in wire- drawing in the procedure of galvanisation by hot immersion in zinc. |
| Temperature resistance °С | +150 °C; |
| P [bar] | 250 bar for reciprocating pumps; 50 bar for centrifugal pumps; |
| Technical datasheet | Glass rubber packing |
Applications
- Industrial Applications
- Automotive Industry
- Chemical Processing
FAQ
What materials are used in Rubberglass packing?
What are the key performance variables for this product?
How is Rubberglass packing installed?
Rubber glass packing
- Brand: Italy
- Product Code: Rubber glass packing
- Availability: ✅On stock
Available Options
Related Products
Aramid Packing GD6104
Features The aramid gland packing GD6104 is made with aramid discontinuous twisted yarns. The Impregnation occurs in two steps: before on each yarn and then on the body during the braiding. The compression packing GD6104 is for pourpose dynamic applications with a good value for money Composition Discontinuous aramid yarns PTFE impregation Lubricant silicone free Applications Pump packing..
Red silicone coated glass packing
This red or black silicon-coated packing is made with 6-9 μm textured and twisted glass yarns. Considered an excellent substitute for asbestos, these round, square or rectangular glass types of packing can, on request, be coated with red or black silicone to confer anti-irritant and dust-proof properties, ideal for the food sector. Excellent spring-back. The siliconized glass packing can stand up to 200 °C ..
PTFE/glass/graphite packing
T-glass packing is produced using special high quality glass yarns braided with 4 diagonals and impregnated with a PTFE dispersion and graphitised on the outside. It is extremely hard and compact. This buffer has been designed to achieve the best results taking into account the type of system used and the operating variables, which are: Line speed Filament dimensions Uniform zinc coating Homogeneous distribution / zinc saving Buffer duration APPLICATI..
Glass packing with stainless braiding
This glass packing is made entirely of 6-9 μ glass yarns with an external AISI 304 stainless steel sleeve or in the more economic version made of galvanized steel. The sleeve prevents the packing from fraying and allows it to remain intact longer in its seat on the kiln car. The glass packing features exceptional resistance and can easily be fitted into place on the car. The most widely requested diameters are 30, 42 and 50 mm. APPLICATIONS This glass packing wi..
Aramid Packing 1201P
Aramid Packing 1201P The offered Aramid fiber packing is impregnated with lot of PTFE dispersion. It is suggested for use in media, consisting of many tiny abrasive particles, For sealing pumps, mixers, valves, sliders and refiners, Aramide packing 1201 P is used. Aramid packing 1201P wears out very smoothly, even under very elevated stress circumstances. The Aramid packing 1201P can be used for sealing in a wide range of chemical hostile settings as well as up to 280°C in..