PEEK Rods
Applications:
- medical technology
- engineering
- food technology
- electro engineering
| MECHANICAL PROPERTIES | VALUE | UNIT | PARAMETER | NORM |
|---|---|---|---|---|
| Modulus of elasticity (tensile test) |
4200 | MPa | 1mm/min | DIN EN ISO 527-2 |
| Tensile strength | 116 | MPa | 50mm/min | DIN EN ISO 527-2 |
| Tensile strength at yield | 116 | MPa | 50mm/min | DIN EN ISO 527-2 |
| Elongation at yield | 5 | % | 50mm/min | DIN EN ISO 527-2 |
| Elongation at break | 15 | % | 50mm/min | DIN EN ISO 527-2 |
| Flexural strength | 175 | MPa | 2mm/min, 10 N | DIN EN ISO 178 |
| Modulus of elasticity (flexural test) |
4200 | MPa | 2mm/min, 10 N | DIN EN ISO 178 |
| Compression strength | 23/43/102 | MPa | 1% / 2% | EN ISO 604 |
| Compression modulus | 3400 | MPa | 5mm/min, 10 N | EN ISO 604 |
| Impact strength (Charpy) | n.b. | kJ/m2 | max. 7,5J | DIN EN ISO 179-1eU |
| Notched impact strength (Charpy) | 4 | kJ/m2 | max. 7,5J | DIN EN ISO 179-1eA |
| Ball indentation hardness | 253 | MPa | ISO 2039-1 |
| THERMAL PROPERTIES | VALUE | UNIT | PARAMETER | NORM |
|---|---|---|---|---|
| Glass transition temperature | 150 | C | DIN 53765 | |
| Melting temperature | 341 | C | DIN 53765 | |
| Heat distortion temperature | 162 | C | HDT, Method A | ISO-R 75 Method A |
| Service temperature | 300 | C | short term | NN |
| Service temperature | 260 | C | long term | NN |
| Thermal expansion (CLTE) | 5 | 10-5*1/K | 23-60°C, long. | DIN EN ISO 11359-1;2 |
| Thermal expansion (CLTE) | 5 | 10-5*1/K | 23-100°C, long. | DIN EN ISO 11359-1;2 |
| Thermal conductivity | 0.27 | W/(k*m) | ISO 22007-4:2008 | |
| Specific heat | 1.1 | J/(g*K) | ISO 22007-4:2008 | |
| Thermal expansion (CLTE) | 7 | 10-5*1/K | 100-150°C, long. | DIN EN ISO 11359-1;2 |
| ELECTRICAL PROPERTIES | VALUE | UNIT | PARAMETER | NORM |
|---|---|---|---|---|
| surface resistivity | 1015 | O | Silver electrode, 23°C, 12% r.h. | DIN IEC 60093 |
| volume resistivity | 1015 | O*cm | Silver electrode, 23°C, 12% r.h. | DIN IEC 60093 |
| Dielectric strength | 73 | kV/mm | ISO 60243-1 | |
| Resistance to tracking (CTI) | 125 | V | Platin electrode, 23°C, 50% r.h., solvent A | DIN EN 60112 |
| OTHER PROPERTIES | VALUE | UNIT | PARAMETER | NORM |
|---|---|---|---|---|
| Resistance to hot water/ bases | + | - | - | |
| Flammability (UL94) | V0 | - | listed (value at 1.5mm) | DIN IEC 60695-11-10; |
| Resistance to weathering | - | - | - | |
| Water absorption | 0.03 | % | 24h / 96h (23°C) | DIN EN ISO 62 |
| General specification | |
| Applications: | bearings, including operating at high speeds; pinions and gears, capable of withstanding extreme loads; parts operating at high friction and / or temperatures: directing, including furnaces; housing and pump components (e.g., turbine impeller), and compressors; seat ball valves; of the shut-off mechanisms for liquids and gases; supporting wheels, liners; pistons; a substrate; Details flow meters, filters, heat exchangers for the chemical industry; component sensors, pH-meters, details of laboratory equipment; Pressure sensor housing, the housing of the heating elements; accessories; plugs; slide bearings; worms and worm wheels; rollers, rope pulleys, rollers and bushings; closures; connectors and sockets; bearings for hydraulic pumps; |
| Temperature resistance °С | -40°C +260°C, shortly to 300 °C |
| Size |
|
| Weight: | 1.31 g/cm³ |
| Technical datasheet | PEEK Sheetings - TDS |
Applications
- Industrial Components
- Automotive Parts
- Chemical Processing
FAQ
What are PEEK rods made of?
What is the temperature range for PEEK rods?
How do PEEK rods perform in chemical environments?
Rods of Polyether ether ketone / PEEK
- Brand: GTeek
- Product Code: PEEK rods / Polyether ether ketone rods
- Availability: ✅On stock
Available Options
Related Products
PEEK tubing
PEEK tubing PEEK tubing (a non-fluoropolymer) is well known for its very high degree of hardness even at elevated temperatures. Such tubing enjoys resistance to extremely high pressures and in many cases has replaced stainless steel. Due to its high purity, PEEK tubing does not leech out damaging ‘extractables’ and is very effective in the trace analysis of complex fluids. PEEK tubing is flame-retardant and exhibits very low smoke emissions lending itself well t..
PEEK Rods - 30% Glass Fibre filled
PEEK Rods - 30% Glass Fibre filled Our 30% Glass fibre filled PEEK is a material with dramatically increased thermal bearing strength and great creep and radiation resistance. The glass fibre as a filler added to the Virgin PEEK makes it highly resistant at higher temperatures, making it ideal for structural applications that need superior strength or stability at temperatures of about 300°F. The glass filler lowers as well the PEEK materi..
PEEK Rods - 30% Carbon Filled
PEEK Rods - 30% Carbon Filled PEEK CF 30 rods are made of a 30 percent carbon-filled PEEK substance developed under the tradename PEEK CF30 black. The structure of the carbon fiber gives the PEEK material a high degree of rigidity and resistance to creep. Carbon fiber reinforced PEEK rods show very high mechanical strength values though having a lower density than the one of the 30 percent Glass fiber reinforced PEEK. In comparison, carbon fiber composites ten..
Ceramic filled PEEK rods
Ceramic filled PEEK rods This special version of PEEK is ceramic fibers filled. The ceramic filled PEEK is offered in grey color for different applications in which part pigment is a consideration. Ceramic filled PEEK rods offer great machinability and have high strength and good stiffness. The ceramic filled PEEK has low thermal expansion and low burring degree. This material has a good heat deflection temperature and excellent thermal stabili..
PEEK ESD Electrically Conductive rods
PEEK ESD Electrically Conductive rods We have developed Electrically Conductive PEEK ESD material - nano black, using Victrex ® PEEK 450 G polymer. This electrically conductive material is suitable for applications that involve a plastic with the added characteristic of electrical conductivity. PEEK ESD Electrically Conductive rods benefit from the addition of carbon nano fibers which allow to achieve a high degree of conductivity while maintaining relati..
PEEK Electrically Conductive rods
PEEK Electrically Conductive rods We have developed Electrically Conductive PEEK material - nano black, This electrically conductive material is suitable for applications that involve a plastic with the added characteristic of electrical conductivity. PEEK Electrically Conductive rods benefit from the addition of carbon nano fibers which allow achieving a high degree of conductivity while maintaining relatively low filler content. PEEK Electrically Con..
PEEK Rods - Metal Detectable
PEEK Rods - Metal Detectable For machined components that must undergo numerous sterilizations, such as CIP (cleaning in situ) and SIP (sterilization in place) applications, PEEK rod-metal & x-ray detectable is the right choice. It is appropriate for food-approved components that don't require reinforcing but need increased stiffness. The majority of metal detector scanning equipment can detect it since it has extremely fine material additions. Additionally, compare..
Medical grade PEEK Capillary Tubing
Medical grade PEEK Capillary Tubing PEEK capillary tubing of this kind is biocompatible. Medical PEEK capillary tubing is a kind of thin, tiny tube that is especially intended for use in biomedical applications. It is composed of polyether ether ketone (PEEK) material. It is frequently used in medical devices like implants and catheters because it is biocompatible, which means that when it is inserted in the body, it does not have any negative effects. PEEK capil..