RKO Knife Gate Valve for abrasive media
Nominal diameter:
DN 100 - DN 600
Face-to-face:
TAPPI TIS 405-8
MSS SP-81
Flange accommodation:
EN 1092 PN 10
JIS B 2238 10K
ASME/ANSI B16.5
Class 150
AS Table D & E
BS Table D
Tightness check:
EN 12266-1:2009 Rate A
Max. Operating pressure:
DN 100 - DN 450, 10 bar
DN 500 - DN 600, 6 bar
| General specification | |
| Technical datasheet | RKO Knife Gate Valve for abrasive media |
Applications
- Industrial Processes
- Chemical Handling
- Oil & Gas Applications
FAQ
What is the material of the RKO Knife Gate Valve?
What is the nominal diameter range for this valve?
How is the valve installed?
RKO Knife Gate Valve for abrasive media
- Brand: Germany
- Product Code: RKO Knife Gate Valve for abrasive media
- Availability: On stock
Available Options
Related Products
MV Universally applicable Knife Gate Valve
MV Universally applicable Knife Gate Valve The knife gate valve MV is used in many application areas. The valve has a bevel edge door that cuts through various media efficiently. The gate is pressed onto the seat in a closed position, giving a narrow and safe seal. This unique shut-off method makes the MV valve appropriate for liquids as well as for dry media such as pulp, sludge, biomass, dust and various waste types. Nominal diameter: DN 50 - DN 1600 Face-to-face: Co..
HP Knife Gate Valve for high pressure applications
HP Knife Gate Valve for high pressure applications These HP, HPT and HX high-pressure knife gate valves are all made to resist high bi-directional pressures. They are fitted with "O" port gates that run through and this ensures a really safe and efficient shut-off of extremely focused and static media. This shut-off efficiency, together with its outstanding fluid features, makes it appropriate for challenging working circumstances with materials such as pulp (pulp densit..
HPT Knife Gate Valves for high pressure applications
HPT Knife Gate Valves for high pressure applications Our HP, HPT and HX high-pressure knife gate valves are all able to resist high bi-directional pressure. They are fitted with "O" port gates that run through and this ensures a really safe and efficient shut-off of extremely concentrated or static media. This shut-off efficiency, together with its outstanding flow handling features, makes this knife gate valve appropriate for challenging working circumstances with materi..
SLV Knife Gate Valve for abrasive slurry
SLV Knife Gate Valve for abrasive slurry Our SLV and SLF knife gate valves are particularly appropriate for abrasive and challenging slurry where quality of operation and low life cycle costs are highlighted. The SLV is a lugged variant whereas the SLF is fully flanged and particularly appropriate for ancient non-centered tubes or apps with low stress. Nominal diameter: DN 50 - DN 900 Face-to-face: manufacturing standard Flange accommodation: EN 1092 PN 10 A..
TV Knife Gate Valve
TV Knife Gate Valve The knife gate valve TV is used as an isolation valve for a transmitter or sensor on a tank for which a short face-to-face length is required. The gate valve arrives with in a stainless steel valve body, gate and retainer rings. Several seat materials are available and the retainer ring system leads to very cost-efficient servicing. The knife gate valve can be installed straight on the tank wall and the transmitter can be removed without flooding the ta..