PTFE Rods with custom specified fillers
Below you will find only several most purchased PTFE rods with custom specified fillers. We can manufacture any combination you may need as per your specific applications.
| GLASS-FILLED PTFE | 25% short glass fibre; 85% virgin PTFE | Wear resistant, improved hardness, lower thermal expansion, lower deformation under load |
| CARBON FIBER- FILLED PTFE |
5% carbon fiber; 95% PTFE | Increased hardness, lower deformation under load; can be used in HF and strong alkali where glass filled PTFE fails; less abrasive on mating surface |
| GRAPHITE-FILLED PTFE | 5% graphite; 95% PTFE | Excellent wear properties against soft metals;high load carrying capability in high speed contact applications; chemically inert |
| BRONZE-FILLED PTFE | 40%-60% Bronze powder; 60%-40% PTFE | High thermal conductivity; better creep resistance; linear bearing material |
| GLASS-MOLY-FILLED PTFE | 10-15% Glass fiber; 5% Molybdenum DiSulfide and 80-85% PTFE | Very hard and stiff; reduces friction; little effect on electrical properties; unreactive chemically |
| General specification | |
| Temperature resistance °С | 260 С |
| Size | Diameter mm: ф10 ф20 ф30 ф40 ф50 ф60 ф70 ф80 ф90 ф100 ф120 ф150 ф200 ф250 ф300 |
| Length | 1000 mm |
| Weight: | 2.2 g/cm3 |
Applications
- Industrial applications
- Automotive components
- Chemical processing
FAQ
What materials are used in glass-filled PTFE?
How does carbon fiber-filled PTFE perform under load?
What are the benefits of graphite-filled PTFE?
PTFE Rods with custom specified fillers
- Brand: GTeek
- Product Code: PTFE Rods with fillers
- Availability: On stock
Available Options
Related Products
PTFE graphite filled rods
PTFE graphite filled rods EXTRUDED PTFE TEFLON GRAPHITE ROD has good thermal conductivity, is Chemically inert, Low friction. Minimum wear to mating surface. Graphite has good chemical resistance to corrosive environments and exhibits good initial wear and rubbing/sliding characteristics in dry and water applications. Commonly blended with carbon and PTFE. The Filled Grade PTFE TEFLON products are widely used as machining stock for all kinds of chemical, electrical and ..
PTFE glass filled rods
PTFE glass filled rods PTFE 25% Glass Filled White Rod is a high performance, synthetic fluoropolymer with the glass fibre greatly improving characteristics including mechanical strength, wear resistance and compressive properties by as much as 40%. The long term service temperature range of PTFE Rod is from -200°C to 260°C and has a short term maximum service temperature of 300°C. These PTFE rods are reinforced with 25% glass fibres. The added glass fi..
PTFE carbon filled rods
PTFE 25% Carbon Filled Black Rod is a high performance, synthetic fluoropolymer with the carbon fibre greatly improving by a notable margin characteristics including electrical properties, deformation strength and wear and abrasion resistance. Carbon is a brittle material itself, having poor wear properties and mechanical strength. The resulting material after the mixture of PTFE and carbon fibers, however, has excellent mechanical and wear properties. Carbon Filled PT..
PTFE Glass + Graphite filled rods
PTFE Glass + Graphite filled rods These rods are made of Polytetrafluoroethylene (PTFE) filled with glass / graphite. The mixture of both fillers allows resistance against soft metals a creates a chemically inert alloy with outstanding wear characteristics. At both sides of the temperature scale - both for high and low temperatures, deformation under stress is also decreased. The PTFE Glass and graphite filled rods are an outstanding self-lubricating ..