PTFE graphite filled rods
EXTRUDED PTFE TEFLON GRAPHITE ROD has good thermal conductivity, is Chemically inert, Low friction. Minimum wear to mating surface. Graphite has good chemical resistance to corrosive environments and exhibits good initial wear and rubbing/sliding characteristics in dry and water applications. Commonly blended with carbon and PTFE.
The Filled Grade PTFE TEFLON products are widely used as machining stock for all kinds of chemical, electrical and mechanical components where the outstanding performance characteristics of PTFE are required.
Graphite-filled PTFE has exceptional chemical resistance and is compatible with most hydraulic fluids. Outstanding performance when used for hydraulic/pneumatic compression type rod and piston seals, bearing bands and rotary applications.
Advantages of Graphite-Filled PTFE:
- Low coefficient of friction compared to other filled PTFE materials.
- Higher flexural modulus and surface hardness than unmodified PTFE.
- Lower notched impact strength, tensile strength, elongation at break and electrical characteristics compared with unmodified PTFE.
- Tendency of graphite to leach out.
| General specification | |||||||||||||
| Characteristics |
|
||||||||||||
| Temperature resistance °С | 260 °C | ||||||||||||
| Length | 1000 mm or per request | ||||||||||||
| Weight: | 2.14- 2.19 g/cm3 | ||||||||||||
| Technical datasheet | PTFE graphite filled rods |
||||||||||||
Applications
- Chemical processing
- Hydraulic applications
- Industrial machinery
FAQ
What are the main benefits of PTFE graphite filled rods?
In what applications can PTFE graphite filled rods be used?
How does graphite enhance the properties of PTFE?
PTFE graphite filled rods
- Brand: GTeek
- Product Code: PTFE graphite filled rods
- Availability: On stock
Available Options
Related Products
PTFE Rods
PTFE rods (Extruded) PTFE rod has excellent resistance to most chemicals and solvents and is capable of operating at high and low temperatures - up to 260°C. The PTFE rods also have a very low coefficient of friction and are commonly used in food contact applications. Rods of PTFE provides good thermal stability and has good electrical properties, but are not suitable for wear application and is difficult to bond. Advantages: Extr..
PTFE Rods with custom specified fillers
PTFE Rods with custom specified fillers Below you will find only several most purchased PTFE rods with custom specified fillers. We can manufacture any combination you may need as per your specific applications. GLASS-FILLED PTFE 25% short glass fibre; 85% virgin PTFE Wear resistant, improved hardness, lower thermal expansion, lower deformation under load CARBON FIBER- FILLED PTFE 5% carbon fiber; 95% PTFE Increased hardn..
PTFE carbon filled rods
PTFE 25% Carbon Filled Black Rod is a high performance, synthetic fluoropolymer with the carbon fibre greatly improving by a notable margin characteristics including electrical properties, deformation strength and wear and abrasion resistance. Carbon is a brittle material itself, having poor wear properties and mechanical strength. The resulting material after the mixture of PTFE and carbon fibers, however, has excellent mechanical and wear properties. Carbon Filled PT..
PTFE rods with PFA
PTFE rods with PFA PTFE filled with PFA rods are made of chemical-modified polytetrafluoroethylene (PTFE) which fills the gap between conventional PTFE and melt-processable PFA and extends our product range. By changing the polymer chain, several characteristics of traditional PTFE have been enhanced. Key benefits: Excellent weldability Low load distortion Applications: Seals Welded parts Gaskets Encapsulated metal inserts Bearing pads ..
PTFE rods - Ceramic filled
PTFE rods - Ceramic filled Ceramic filled PTFE rods - type BL are made of a distinctive, mechanically stressed Ceramic filled PTFE compound with elastic behaviour and properties. The ceramic filled PTFE has low heat conductivity and chemical inertia of the alloyed metal. It has outstanding tribological friction and wear characteristics compared to the glass filled PTFE, with reduced permeation producing less abrasive wear. Do not use in for food applicatio..