T-glass packing is produced using special high quality glass yarns braided with 4 diagonals and impregnated with a PTFE dispersion and graphitised on the outside. It is extremely hard and compact. This buffer has been designed to achieve the best results taking into account the type of system used and the operating variables, which are:
- Line speed
- Filament dimensions
- Uniform zinc coating
- Homogeneous distribution / zinc saving
- Buffer duration
APPLICATIONS
Buffers for wire-drawing. These are used in wire- drawing in the procedure of galvanisation by hot immersion in zinc
| General specification | |
| Material: | glass fibers, ptfe impregnation, graphite coating |
| Applications: | Buffers for wire-drawing. These are used in wire- drawing in the procedure of galvanisation by hot immersion in zinc. |
| Temperature resistance °С | -100 - +260 C; |
| P [bar] | 250 bar for reciprocating pumps; 50 bar for centrifugal pumps; |
| Technical datasheet | Graphitised PTFE Glass Packing |
Applications
- Industrial Applications
- Chemical Processing
- Oil & Gas Industry
FAQ
What materials are used in T-glass packing?
What are the key operating variables for this packing?
In what applications can T-glass packing be utilized?
PTFE/glass/graphite packing
- Brand: Italy
- Product Code: PTFE/glass/graphite packing
- Availability: On stock
Available Options
Related Products
egPTFE Gland Packing - GTB70
eg PTFE Gland Packing - GTB70 Features The compression packing GTB70 is made with ePTFE yarns filled with graphite powder and silicone lubricant. This style of packing is a great solution for dynamic applications because the coefficient of friction is very low and the PTFE guarantees a wide range of fluid sealing. Composition 100% expanded graphitized and lubricated PTFE yarns Applications PTFE Compression Packing is suitable for reciprocating and centrifugal pumps. Avo..
Aramid Packing GD6104
Features The aramid gland packing GD6104 is made with aramid discontinuous twisted yarns. The Impregnation occurs in two steps: before on each yarn and then on the body during the braiding. The compression packing GD6104 is for pourpose dynamic applications with a good value for money Composition Discontinuous aramid yarns PTFE impregation Lubricant silicone free Applications Pump packing..
Aramid glass packing
Aramid glass packing Aramglass packing is braided with 4 diagonals and impregnated with a special dispersion. It is produced with aramid yarns and glass fiber yarn. It is extremely hard and compact. This buffer has been designed to achieve the best results taking into account the type of system used and the operating variables, which are: Line speed Filament dimensions Uniform zinc coating Homogeneous distribution/zinc saving Buffer duration APPLICATIONS Buffers fo..
Rubber glass packing
Considered an excellent substitute for asbestos, Rubberglass packing is braided with 4 diagonals and is entirely produced with special high quality glass yarns impregnated yarn by yarn with special polymers. It is extremely hard and compact.This buffer has been designed to achieve the best results taking into account the type of system used and the operating variables, which are:Line speedFilament dimensionsUniform zinc coatingHomogeneous distribution / zinc savingBuffer dura..
Aramid Packing 1201P
Aramid Packing 1201P The offered Aramid fiber packing is impregnated with lot of PTFE dispersion. It is suggested for use in media, consisting of many tiny abrasive particles, For sealing pumps, mixers, valves, sliders and refiners, Aramide packing 1201 P is used. Aramid packing 1201P wears out very smoothly, even under very elevated stress circumstances. The Aramid packing 1201P can be used for sealing in a wide range of chemical hostile settings as well as up to 280°C in..
Tags: PTFE/glass/graphite, packing