PE 500 / PE-HMW rods
- good mechanical features
- good sliding features
- antivibrating
- dimensionally stable
- scatch- and cut-proof
- resistant to acids and alkaline solutions
- no water absorption
- physiologically safe (FDA/EU-Regulation)
- stabilized against UV rays
Main Features of PE 500 rods:
-
Minimal moisture absorption
-
High impact strength
-
Easy to machine
-
Low friction rate
Polyethylene 500 rods are preferably used in :
- Machine parts with food, Food industry components – food industry and there especially in the processing of meat and fish
- swing doors, impact strips in hospitals, in ice stadiums and sports grounds as lining or coating material, etc.
- gaskets, bushings, Filling plants- parts distributors
- Apparatus and container construction
- Battery cells, Bunker and silo cladding, Turning and milling parts
- Ice hockey and sports arena surrounds, Conveyor stars
- Leads, Galvanising drums, Slide bearings, slide strips
- Refrigerated vehicle cladding, Technical medical parts, Foodstuff molds
- Cutting mats, Fans, Valve bodies and components
- Centrifuge bodies
 |
 |
 |
 |
 |
 |
 |
 |
| Density (g/cm³) | 0.95 |
|---|---|
| Water absorption (%) | - |
| Flammability 3mm () | HB |
| Flammability 6mm () | HB |
| Elongation at break (%) | >50 |
| Tensile modulus of elasticity (Mpa) | 1100 |
| Ball indentation hardness (Mpa) | - |
| Shore hardness (scale D) | 65 |
| Melting temperature (°C) | 135 |
| Coefficient of linear expansion (10⁻⁶K⁻¹) | 150…230 |
| Service temperature. long term minimum (°C) | 100 |
| Service temperature. long term maximum (°C) | 80 |
| Service temperature. short term (max) (°C) | 100 |
| Heat Deflection Temperature (°C) | 79 |
| Dielectric constant | 2.3 |
| Dielectric Dissipation Factor | - |
| Surface resistivity (Ω) | >10¹⁴ |
| Comparative Tracking Index () | 600 |
| Dielectric strength (kV/mm) | 45 |
| Pipe Fitting Range | - |
| Seal Type | - |
| General specification | |
| Applications: |
|
| Characteristics |
|
| Temperature resistance °С | 80-120 °C |
| Weight: | 0.96 g/cm³ |
| Technical datasheet | Polyethylene 500 / PE 500 / HMW-PE rods |
Applications
- Industrial applications
- Automotive components
- Chemical processing
FAQ
What is PE 500 made of?
What are the key characteristics of PE 500 rods?
What applications are suitable for PE 500?
PE 500 / PE-HMW rods
- Brand: Germany
- Product Code: PE 500 rods / PE-HMW rods
- Availability: On stock
Available Options
Related Products
PE 500 / PE-HMW sheets
PE 500 / PE-HMW sheets High molecular weight Polyethylene 500 also known as HMW-PE or PE 500 is thermoplastic with high molecular weight (as determined by viscometric method). Thanks to their high molecular weight, this type of HMW-PE is ideal material for applications requiring excellent sliding properties and wear resistance. Characteristics: good mechanical features good sliding features antivibrating dimensionally stable scatch- and cut-pro..
Polyethylene PE 300 / PE-HD rods
HD-PE(High density polyethylene) / PE 300 rods High-Density Polyethylene rods, also referred to as HDPE or PE300 rods, have great impact strength, even at temperatures as low as -30ºC. Together with a low coefficient of friction and ease of fabrication, High-Density Polyethylene rods are widely used in automotive, leisure and industrial applications and are particularly suitable for the fabrication of tanks, silos, hoppers etc. High-Density Polyethylene rods are..
Polyethylene PE 500 / PE-HMW - DR - Regranulate sheets
Polyethylene PE 500 / PE-HMW - DR - Regranulate sheets The confetti type PE-500 polyethylene is Acid, alkali, salts, rust, damages, cracks, abrasion and friction resistant. (PE 500) does not absorb moisture. Polyethylene PE 500 / PE-HMW - DR - Regranulate sheets are scratch-resistant, offer very strong slippage surface properties and abrasion resistance. Polyethylene PE 500 confetti type can be used in contact with food and drinking water, it's non-ha..
Polyethylene PE 500 / PE-HMW - Black AST - Anti-Static sheets
Polyethylene PE 500 / PE-HMW - Black AST - Anti-Static sheets This is a PE 500 - polyethylene HMW material with permanently antistatic properties and a specially balanced electrical properties. The electrostatic surface charge of the black AST polyethylene is reduced, dust is not attracted by it and no electrostatic discharge occurs. Polyethylene PE 500 / PE-HMW - Black AST is an anti-static variant which contains a special conductive carbon additive in the m..
Polyethylene PE 500 / PE-HMW - Antimicrobial sheets
Polyethylene PE 500 / PE-HMW - Antimicrobial sheets As a very reliable type of Polyethylene for the food sector we offer this antimicrobial material. This kind of HMW-PE / Polyethylene 500 is an adapted antimicrobial material, making it ideal for direct and repeated food contact. It has an Antimicrobial effect against bacteria, viruses, molds, yeasts and fungi. HMW PE 500 antimicrobial version or Antimicrobial High Molecular Weight Polyethylene..
Polyethylene PE 500 / PE-HMW - Natural - UV resistant
Polyethylene PE 500 / PE-HMW - Natural - UV resistant The regular High Molecular Weight Polyethylene (HMW-PE) as a standard is not considered to be UV stable. When exposed to sunlight and other UV light it will degrade fairly quickly. Extended exposure to sunlight radiation, and ultraviolet rays in particular, results in polyethylene being weathered. The higher energy spectrum of the UV light causes a compound breakdown of the polyethylene elements without proper t..
Polyethylene PE 500 / PE-HMW - High Temperature Resistant
Polyethylene PE 500 / PE-HMW - High Temperature Resistant This PE 500-based material is developed for long service life under higher temperatures. It has very high heat resistance up to 136 Deg C and good wear resistance. Polyethylene is a semi-cristalline thermoplastic with high durability and chemical tolerance, but thermal strength is rather low compared to several other plastics and can not be used at high temperatures. Regarding their molar mass (molecular w..