Application:
Working medium:
• hot water and medium of group 2 (water, air, gas) in the following conditions: a pressure less than 4.0 MPa and temperature less
than +200 °C (depending on the pressure temperature diagram)
• the gas ball valves with flanges can handle natural gas and medium of group 1 at a temperature within the range from -30 °C to +60 °C (GAS design)
• steam at a temperature to +60 °C (on request up to 300 °C)
| Valves Specification | |
| Actuation | Electric actuator, Pneumatic or hydraulic actuator, gear-box, ISO top-flange; hand lever |
| Connection | Flanged |
| DN: | 15, 20, 25, 32, 40, 50, 65, 80, 100, 125, 150, 200, 250, 300, 350, 400, 500 |
| PN: | 16, 25, 40 |
| Seal Material | R-PTFE |
| Tmax | 60 °C |
| General specification | |
| Material: | Carbon steel |
| Applications: | The flanged gas ball valves are steel stop valves intended to be used to fully close or fully open the flow of the medium conveyed. The gas ball valves can not be used for flow throttle or flow control purposes. Special types of these ball valves have been developed for flow control purposes. Owing to their features, the gas ball valves can satisfy the duty of a shutting element in any heating plant system. |
| Technical datasheet |  Gas Ball Valve - Flanged - TDS |
Applications
- Heating plant main pipeline routes
- Heating pipeline crossings
- Gas distribution systems
FAQ
What materials are the flanged gas ball valves made of?
Can these valves be used for flow control?
What are the installation requirements for these valves?
Gas Ball Valve - Flanged
- Brand: Czech Republic
- Product Code: Gas Ball Valve DZT
- Availability: On stock
Available Options
Related Products
Stainless Ball Valve - 3 pieces - threaded
Stainless Ball Valve - 3 pieces - threaded Application: The stainless ball valves from 3 pieces are designed to be used as shut-off valves for corrosive and non-corrosive liquids, gases, vapours and loose materials. Medium may flow in both directions through the ball valves. Thanks to their simple design and reliable function, the ball valves can be used in food, chemical, petrochemical and pharmaceutical industries, in sewage and water treatment plants, etc. TDS Tech..
Stainless Ball Valve - one piece - Wafer
Stainless Ball Valve - one piece - Flanged Application: The stainless ball valves from 1 piecе is designed to be used as shut-off valves for corrosive and non-corrosive liquids, gases, vapours and loose materials. Medium may flow in both directions through the ball valves. Thanks to their simple design and reliable function, the ball valves made of one piece can be used in food, chemical, petrochemical and pharmaceutical industries, in sewage and water treatment pla..
Stainless Ball Valve - 3 pieces - flanged
Stainless Ball Valve - 3 pieces - flanged Application: The flanged stainless ball valves from 3 pieces are designed to be used as shut-off valves for corrosive and non-corrosive liquids, gases, vapours and loose materials. Medium may fl ow in both directions through the ball valves. Thanks to their simple design and reliable function, the ball valves can be used in food, chemical, petrochemical and pharmaceutical industries, in sewage and water treatment plants, etc. T..
Stainless Ball Valve - 1 piece - threaded
Stainless Ball Valve - 1 piece - threaded Housing and ball made of 1.4408. Sealing material PTFE, for screw pin to DIN 3852 Part 2 Form A. Investment casting, hexagon, reduced bore, with lever. Parallel BSP thread to DIN/ISO 228 Application: The stainless ball valves from 1 pieces are designed to be used as shut-off valves for corrosive and non-corrosive liquids, gases, vapours and loose materials. Technical description: T max = 260 C ..
Three Piece Stainless Ball Valve - welding ends
Three Piece Stainless Ball Valve - welding ends Open passage Welding ends on both sides. Housing and ball made of 1.4408. Sealing material PTFE / glass fibre 15%. S: Length conforms to DIN 3202 S13..
Three Piece Stainless Ball Valve - welding ends for tubes to DIN 11866 Series B
Three Piece Stainless Ball Valve - welding ends Open passage Welding ends on both sides. Housing and ball made of 1.4408. Sealing material PTFE / glass fibre 15%. S: Length conforms to DIN 3202 S13..