Control Gate Valves

Application

Control Gate Valves are used in conventional and nuclear power engineering where a specified shape of the performance characteristic depending on the valve travel for different flow rates is required.
Control Gate Valves are very suitable for gas industry where pipings with different pressures are to be connected or where gas is to be discharged from the piping system in a defined way.
heat production and distribution where a defined quantity of the fluid is to be fed to the equipment in order to guarantee performance of the equipment.

Working medium

water
steam
gases
other fluids

Advantages

Control Gate Valves guarantee the metal-to-metal tightness in either flow direction application up to DN 600, up to PN 100 and up to 570 °C for any type of working medium low pressure loss which brings power savings of approximately 500 MWh annually in comparison with a DN 150 PN 250 control valve use of special sealing material which meets the requirements of “Nuclear Spec. D50YP12 Rev. 2”, TA Luft and VDI 2440.

Valves Specification
Actuation	handwheel, Electric actuator, Pneumatic or hydraulic actuator, gear-box, ISO top-flange;
Connection	flanged, welded
DN:	50, 65, 80, 100, 125, 150, 200, 250, 300, 350, 400, 450, 500, 600
PN:	PN 16, 25, 40, 63, 100
Seal Material	Metal-metal
Tmax	595 °C
General specification
Applications:	conventional and nuclear power engineering where a specified shape of the performance characteristic depending on the valve travel for different flow rates is required. gas industry where pipings with different pressures are to be connected or where gas is to be discharged from the piping system in a defined way. heat production and distribution where a defined quantity of the fluid is to be fed to the equipment in order to guarantee performance of the equipment.
Technical datasheet	Control Gate Valve S33C

Applications

Control Gate Valves are used in conventional and nuclear power engineering where a specified shape of the performance characteristic depending on the valve travel for different flow rates is required.
Control Gate Valves are very suitable for the gas industry where pipings with different pressures are to be connected or where gas is to be discharged from the piping system in a defined way.
Control Gate Valves are essential in heat production and distribution where a defined quantity of the fluid is to be fed to the equipment in order to guarantee performance.

FAQ

What materials are Control Gate Valves made from?

Control Gate Valves are typically constructed from high-strength materials suitable for high-pressure applications, including stainless steel and carbon steel.

What is the operational range of Control Gate Valves?

Control Gate Valves can operate effectively across a wide range of pressures and temperatures, making them versatile for various applications.

How are Control Gate Valves installed?

Installation of Control Gate Valves should follow manufacturer guidelines, ensuring proper alignment and sealing to prevent leaks.

EXPERT ADVICE: Ensure regular maintenance and inspection of Control Gate Valves to prolong their lifespan and maintain optimal performance in critical applications.

Write a review

Your Name

Your Review

Note: HTML is not translated!

Rating Bad Good

Related Products

Carbon Steel Gate Valve - PN16

Carbon steel Gate Valve - PN16 Application Non-Rising stem Gate valves are isolating valves designed for full closing or opening of working media flow. If the gate valves are used for regulating or throttling purposes, the manufacturer does not guarantee tightness of the gate valves. For regulation we recommend to use special control gate valve type S33.C. Working medium - water non-corrosive liquids steam air gases of group 1 and 2 petroleum and petroleum pr..

Fully welded gate valve - low temperature

Fully welded gate valve - low temperature Application Fully welded gate valve - low temperature are shut-off valves. It is used especially in power engineering, chemical industry as well as other industries depending on material selection. Working medium water non-corrosive liquids steam air gases Tmax -46°C - +250 °C PN 16,25, 40, 63, 100; TDS..

Bonnet Gate Valve

Application Bonnet Gate Valves are isolating valves designed for full closing or opening of working media flow. The bonnet gate valve has a rotating non-rising stem with its thread inside the valve chamber. The body and wedge have brass or stainless steel sealing rings pressed into them. Stem is sealed with gland packing into the bonnet. Working medium water non-corrosive liquids steam air gases of group 1 and 2 petroleum..

Bonnet Gate Valve for drinking water

Application Bonnet Gate Valve for drinking water are isolating valves designed for full closing or opening of working media flow. The bonnet gate valve has a rotating non-rising stem with its thread inside the valve chamber. Flexible sealing surfaces on wedge are vulcanized with soft rubber. Stem is sealed with O-ring. Installation: horizontal only Working medium water non-corrosive liquids steam air gases ..

KNIFE GATE VALVE WITH NON-RISING STEM

KNIFE GATE VALVE WITH NON-RISING STEM Application The knife gate valve is designed to be used in paper, food, chemical and mining industries, water treatment plants, power engineering, etc. Working medium The knife gate valve is suitable for liquid substances and gases, bulk materials, viscous fluids, fluids containing fibrous particles, sewage water, sludge, foodstuffs, etc. (granulates, sand and similar fluids on request). Solid particles contained in the fluid affe..

KNIFE GATE VALVE WITH RISING STEM

ApplicationThe knife gate valve WITH RISING STEM is designed to be used in paper, food, chemical and mining industries, water treatment plants, power engineering, etc.Working mediumThe knife gate valve WITH RISING STEM is suitable for liquid substances and gases, bulk materials, viscous fluids, fluids containing fibrous particles, sewage water, sludge, foodstuffs, etc. (granulates, sand and similar fluids on request). Solid particles contained in the fluid affect the cor..

Tags: Control, Gate, Valves