Connector Crosses
The Cutting ring connector crosses offer 4 outlets for pipes or other fittings. The cutting ring equal cross series complies with any cutting ring fittings by standard DIN 2353 and enable the manufacturing of systems and their connection to hydraulic pipelines with extreme simplicity.
Advantages:
- The cutting ring Crosses are compatible with all cutting ring fittings according to DIN EN ISO 8434-1 (DIN 2353). They are lso resistant to dynamic loads such as vibrations and pulsations. The cutting ring cross can be loosened and screwed back in as often as is necessary.
- In contrast to a cutting ring the NC compression ring is not hardened, therefore it cannot rust and has good chemical resistance.
- Lubrication of the nut thread for initial assembly is not necessary,
- Vacuum tightness Q< 10^8 mbar l/s,
- Ideal for use in gas and water area
Required tube quality:
The screw connections of the cutting ring cross must be processed with heat treated, seamless stainless steel tubes (1.4571) according to DIN EN ISO 1127. The tolerance category should be D4/T3, the surface must not show any damage and its hardness should not be more than Rockwel HRB 90.
DIN2353 Cutting ring - KV - Equal Cross Bodies - OMD
DIN2353 Cutting ring - KV - Equal Cross Bodies - OMD Pressure Tube O.D. Order-Code Series LL 100 4 KV-LL-04-OMD 100 6 KV-LL-06-OMD 100 8 KV-LL-08-OMD Series L 315 6 KV-L-06-OMD 315 8 KV-L-08-OMD 315 10 KV-L-10-OMD 315 12 KV-L-12-OMD 315 15 KV-L-15-OMD 315 18 KV-L-18-OMD 160 22 KV-L-22-OMD..
DIN2353 Cutting ring - KV - Equal Crosses - SC
DIN2353 Cutting ring - KV - Equal Crosses - SC Pressure Tube O.D. Approx. Dimensions Order-Code PN D1 L1 L2 SW2 SW3 Series L 315 6 27 12,0 12 14 KV-L-06-SC 315 8 29 14,0 12 17 KV-L-08-SC 315 10 30 15,0 14 19 KV-L-10-SC 315 12 32 17,0 17 22 KV-L-12-SC 315 ..
What are the key advantages of using Cutting Ring Connector Crosses in hydraulic systems?
The Cutting Ring Connector Crosses are designed to be compatible with all cutting ring fittings according to DIN EN ISO 8434-1 (DIN 2353). They offer resistance to dynamic loads, including vibrations and pulsations, which is crucial for maintaining system integrity in hydraulic applications. Additionally, they facilitate the connection of multiple pipes or fittings effortlessly, enhancing system design flexibility.
How do the Cutting Ring Connector Crosses ensure leak-proof connections?
The cutting ring design of these crosses creates a robust seal when combined with compatible fittings. The principle of a cutting ring allows for precise compression of the fitting against the pipe, resulting in a leak-proof connection that can withstand high-pressure environments. For specific applications, you may refer to the DIN2353 Cutting ring - KV - Equal Crosses - SC.
Are there any specific applications where Cutting Ring Connector Crosses are recommended?
These crosses are particularly suited for hydraulic systems that require multiple outlets, such as in industrial machinery, automotive applications, and fluid transfer systems. Their robust design allows them to handle dynamic loads and extreme conditions effectively. For alternative configurations, consider the DIN2353 Cutting ring - KV - Equal Cross Bodies - OMD.