Plastic tiles Hestra, Universa type, Light grey

Are you looking for quality and safe flooring around the outdoor pool, on the terrace or pergola? Try Swedish tiles from the Universa series. These can complete the immediate surroundings of your garden and encourage the overall impression of the exterior.
You will appreciate them most around the pools, not only from an aesthetic point of view, but also from the point of view of functionality and safety. Do not forget that the pool is a favorite place for your children's enjoyment, so its surroundings should be a safe zone where there is no risk of injury. 
The floor tiles in the Universa design are a modern covering made of plastic with a very wide range of applications, whether indoors or outdoors.
They are therefore maximally suitable for covered and uncovered terraces, balconies, around the pool, paths in the garden.

Their wide range is supported by modular construction, quick and easy assembly and disassembly by self-help, a color range of elements and the material used. 

Advantages of tiles
Application in areas where there is a presumption of time-limited use
Possibility of re-disassembly and placement in another space
Easy maintenance of terrace floors - no painting required
The surface of terrace floors is resistant to insects and mold
Good tolerance of temperature changes from – 30°C to +70°C
ENvironmentally friendly material
The tiles are UV resistant – they have a constant surface colour

Installation
Hard and flat subsoil (tiles, concrete, wood, etc.) is a prerequisite for ensuring a flat floor. 
Attention, do not place the tiles directly on the surface, which they form, for example.Fatrafol, IPA, textile foil, etc.

The construction of the underside of the Hestra pavement is made up of protrusions that could damage these soft surfaces.
Remove all objects from the installation area and thoroughly clean it.
Start the installation in the corner and always work from left to right.
Lay the floor tiles obliquely against the wall and lay them so that the eyelets are visible on the right side.
Leave a gap of 10 mm between the floor tiles and the wall and/or other objects.

This gap is absolutely necessary and allows thermal expansion, especially when the floor is exposed to different temperatures, e.g. for outdoor use.
Then push the pins into the eyelets to connect the tiles.
Adjust the Hestra tiles with a fine tooth saw, e.g.a jigsaw.
During cutting, it is recommended to invert the floor tiles (bottom side up) so that they are cut in a straight line.
Finish the floor with edges and corner skirting boards as needed.
We offer this assortment as part of accessories.

Do you need help installing? Or are you pressed for time? We will be happy to lay the floor on your balcony, terrace or pergola.