Plastic tiles Hestra, Universa type, Dark gray

Are you looking for quality and safe flooring around your outdoor pool, patio or pergola? Try Swedish tiles from the Universa range. These are the ones that can complete the immediate surroundings in your garden and enhance the overall impression of that particular exterior.
You will appreciate them most around swimming pools, not only from an aesthetic point of view, but also from the point of view of functionality and safety. Don't forget that the pool is your children's favorite place of fun, so the surrounding area should be a safe zone where there is no risk of injury.

Universa floor tiles are a modern plastic covering with a very wide range of applications, both indoors and outdoors.
They are therefore extremely suitable for covered and uncovered terraces, balconies, around the pool, on paths in the garden.
Their wide range is supported by their modular construction, quick and easy assembly and disassembly with your own help, the colour range of elements and the material used.
Combine with other colours according to your imagination.
We are the exclusive dealer of paving in the Czech Republic.

Advantages of Paving
Application in areas where limited time use is expected
Can be dismantled again and placed in another space
Easy maintenance of terrace floors - no painting required
The surface of the terrace floor is insect and mould resistant
Good tolerance of temperature changes from - 30°C to +70°C
ENvironmentally friendly material
The tiles are UV resistant - they have a stable surface colour

Installation
A hard and level subfloor (tiles, concrete, wood, etc.) is a prerequisite for ensuring a level floor.
Caution, do not lay the tiles flat on a surface consisting of e.g. Fatrafol, IPA, textile foils, etc.
The construction of the underside of Hestra tiles consists of protrusions that could damage these soft surfaces.
Remove all objects from the installation area and clean it thoroughly.
Start the installation in a corner and always work from left to right.
Place the floor tiles diagonally against the wall and lay them so that the eyelets are visible on the right side.

Leave a 10 mm gap between the floor tiles and the wall and/or other objects.

This gap is absolutely necessary and allows for thermal expansion, especially when the floor is exposed to different temperatures, e.g.in outdoor use.
Then push the pins into the eyelets to connect the tiles.
Adjust the Hestra tiles using a fine-toothed saw, e.g.a jig saw.
During cutting, we recommend turning the floor tiles over (bottom side up) so that they are cut in a straight line.
Finish the floor with edges and corner strips as required. This range is offered as part of the accessories.