Plastic tiles Hestra Classic, Dark gray

Hestra plastic tiles have a wide range of uses, they are suitable for both household and commercial use, indoors and outdoors. You can safely use them not only around the pool and water areas, but also in the garage, in the caravan while camping, on non-professional sports grounds or in the home workshop. They are characterized by excellent utility properties, are resistant to moisture and their maintenance is really very simple.

Also worth noting is the elegant look and texture of the tread pattern, which has been popular since the 1980s.
Who built a house or reconstructed an apartment knows how difficult it is to find a skilled craftsman today.

In the case of Hestra tiles, you do not have to solve this problem – you can easily install it yourself! Its laying is as simple as composing a puzzle or Lego kit.
The tiles have eyelets on one side, pins on the other, and you just click them into each other. IT is possible to dismantle the tiles at any time, or to replace even a single part.
If you need to trim some pieces when laying tiles, a saw for wood or plastic will suffice. 
Combine with other colors according to your imagination.

Advantages of tiles
Suitable for home and commercial use
Health and environmental safety
Water resistance, UV colour fastness
Easy to maintain, often just cleans the water
Odourless, emission-free 
Lock connection allowing self-installation

Installation
Hard and flat subsoil (tiles, concrete, wood, etc.) is a prerequisite for ensuring a flat floor. 
Attention, do not place the tiles directly on the surface, which they form, for example.
Fatrafol, IPA, textile foil, etc.

The construction of the underside of the Hestra pavement is made up of protrusions that could damage these soft surfaces.
Remove all objects from the installation area and thoroughly clean it.
Start the installation in the corner and always work from left to right.
Lay the floor tiles obliquely against the wall and lay them so that the eyelets are visible on the right side.
Leave a gap of 10 mm between the floor tiles and the wall and/or other objects.

This gap is absolutely necessary and allows thermal expansion, especially when the floor is exposed to different temperatures, e.g. for outdoor use.
Then push the pins into the eyelets to connect the tiles.
Adjust the Hestra tiles with a fine tooth saw, e.g. a jigsaw.
During cutting, it is recommended to invert the floor tiles (bottom side up) so that they are cut in a straight line.
Finish the floor with edges and corner skirting boards as needed.

We offer this assortment as part of accessories..
.