Outdoor tiles Hestra type Woodlook Dark oak

What flooring should I choose for my balcony, pergola, veranda or home spa? Try the Swedish tiles from the Wood Look range. It does not aim to replace the beauty and charm of natural wood, but to offer you an alternative solution.
Terraces and balconies are places where you can relax or sit with friends.
If you want to enjoy your stay on the balcony, you need a proper floor on the balcony in addition to comfortable seating.

The flooring not only affects the look of the balcony, but also its comfort and durability.
That's why Wood Look flooring is durable, practical to maintain, pleasant to tread on and low maintenance.
At the same time, you do not have to expect any negative properties of the wood, there is no risk of degeneration due to mould, drying or warping.
The special finish also prevents visible scratching.
The colour of the wood is rather darker and warmer. It will make your balcony and patio beautifully cosy, matching the warm tones of beige.

See how it looks in daylight compared to the other colours in the collection.

Benefits of the tiles
Quick and easy installation (lay it yourself)
Natural look imitating wooden floors
Waterproof, non-scratch and non-slip surface
Smooth, chip-free outdoor patio floor surface
Comfortable surface for barefoot walking

Installation
A hard and level subfloor (tiles, concrete, wood, etc.) is a prerequisite for ensuring a level floor.

Caution, do not lay the tiles flat on a surface consisting of Fatrafol, IPA, fabric sheeting, etc.
The construction of the underside of Hestra tiles consists of protrusions that could damage these soft surfaces.
Remove all objects from the installation area and clean it thoroughly.
Start the installation in a corner and always work from left to right.
Place the floor tiles diagonally against the wall and lay them so that the eyelets are visible on the right side.

Leave a 10 mm gap between the floor tiles and the wall and/or other objects.
This gap is absolutely necessary and allows for thermal expansion, especially when the floor is exposed to different temperatures, e.g. in outdoor use.
Then push the pins into the eyelets to connect the tiles.
Adjust the Hestra tiles using a fine-toothed saw, e.g.a jig saw.
During cutting, we recommend turning the floor tiles over (bottom side up) so that they are cut in a straight line.
Finish the floor with edges and corner strips as required.

This range is offered as part of the accessories.

Could you use some help with installation? Or are you pressed for time? We will be happy to lay the floor on your balcony, terrace or pergola.