We offer a wide range of extruded solid round rubber cord to meet the specific requirements of our clients. Our supplied round rubber cords are available in various materials, diameters and hardness.
The materials used for the manufacturing of the solid rubber cords are different. We can offer lot of rubber cord types including:
Oil resistant (NBR) rubber cord
(HNBR) rubber cords
EPDM cords
Neoprene cords
Silicone cord
Fluoroelastomer (FPM) cord
Viton (Fluorocarbon) cord
The various type of rubber cords are known for exhibiting features in wide range of working conditions such as:
High temperature resistance (-50 C to +300 C);
Excellent resistance to oils, fuels, lubricants, and most mineral acids;
Excellent resistance to corrosive fluids compared to other polymers;
Excellent resistance atmospheric oxidation, sun and weather;
Excellent resistance to fungus and mold;
Extremely low permeability to a broad range of substances;
The round solid rubber cord resists many aliphatic and aromatic hydrocarbons;
Excellent compression set values at high temperatures;
Resist degradation by over 300 fluids;
Good electrical properties in low voltage low frequency;
Retains good mechanical properties at high temperatures;
Solid EPDM Rubber Cord
Round EPDM rubber cord has very good resistance to aging, weather, UV, and ozone. EPDM rubber cord is made of a synthetic elastomer. The EPDM rubber cords exhibit outstanding heat, ozone, weather, and heat resistance and have excellent electrical insulating properties. EPDM rubber cord has a lower cost than Neoprene® while offering many of the same properties.
The solid round EPDM cord is often used for applications that are exposed to outdo..
FKM/Viton® Rubber cord
FKM/Viton® rubber cord belongs to the fluoroelastomer category of elastomers. This rubber cord offers excellent resistance to a wide variety of corrosive fluids at elevated temperatures without major degradation.
FKM/Viton® rubber cords have excellent resistance to ozone, oxygen, have good mechanical properties, and low compression set. Viton® rubber cord is not suitable for contact with molecular weights ketones and esters (e.g methyl ethyl ..
Solid NBR Rubber cord - oil-resistant
NBR solid rubber cord is widely used for applications involving resistance to petroleum oils minerals and vegetable oils. It is also suitable for contact with aromatic hydrocarbons and most dilute alkalies and acids. NBR rubber cord also has good mechanical properties, low compression set and is most cost-effective.
It is not suitable for high-temperature fuel applications or for protection against ozone, ketones, esters, ald..
Solid CR Neoprene rubber cord
Round Neoprene cord (very good resistance to aging, weather, UV, and ozone). Neoprene rubber cord is made of a synthetic elastomer. The Neoprene rubber cords exhibit outstanding heat, ozone, weather, and heat resistance and have excellent electrical insulating properties.
The solid round CR Neoprene cord is often used for applications that are exposed to outdoor or high heat environments. Neoprene rubber cords have weak resistance to..
Polyurethane rubber cord
Polyurethane cord offers superior seal performance in hydraulic situations, where high pressures, shock loads, or abrasive contamination is anticipated. Polyurethane cord possesses chemical compatibility similar to that of Nitrile, offering good resistance to petroleum-based oils, hydrocarbon fuels and hydraulic fluids, the oxidizing effects of ozone, and the aging effects of sunlight. It also has good tear resistance.
Unless specially comp..
Silicone rubber cord
Silicone rubber cord can handle extreme temperatures -40°C to +200°C. Good electrical resistance and insulation properties. Popular applications for Silicone solid cord include use as a silicone gasket in applications that require superior sealing properties in harsh environments. Silicone Cord often is serving as a rubber gasket for applications that demand exceptional sealing properties.
The silicone cord can be used for exposed channels or gro..