Rubber "D" profiles

We offer semi-round rubber D profiles of dense and sponge EPDM rubber, silicone, CR, NBR and other elastomers. Our products have a high resistance against chemicals, handle a wide range of temperature differences and have good flexibility. Due to these characteristics the rubber D-profiles are used for heat resitant equipments and ovens.

Rubber bumpers, insulators or even finger protectors can be replaced with semiround “D” profiles. This is the reason why it is widely used. The semiround “D” rubber profiles are usually fixed by a double-sided tape. When using a “D” profile you can give protection against bumps or collisions.

The semi-circular elastomeric rubber profile is chemical-resistant has a wide range at temperature-tolerance and very flexible. Thanks to these properties are used for high-temperature distillation equipment and for furnaces.


Semiround silicone profiles

Semiround silicone profiles

HR - 2136 HR - G122 10×10 mm HR 1013 HR 1208 HR 1233 HR 1308 Sl HR 1451 HR 1454 Sl HR 1491 HR 1593 HR 1597 HR 1613 HR 1626 HR 1686 HR 1752 Hr 1870 HR 2014 HR 2094 Hr 2113 HR 2185 HR 2418 HR 2485 HR 2536 HR 2684                 ..

Semiround solid rubber profiles

Semiround solid rubber profiles

1B= 50 m MZS 25110 HR - 1374 25×30 mm HR - 1610 HR - G151 14×15 mm HR - G513 12,8×3 mm HR - G576 25×28 mm HR - G649 HR 0662 HR 0816 HR 0859 HR 0867 HR 0935 HR 0960 HR 0962 HR 1007 HR 1201 HR 1251 HR 1257 HR 1312 HR 1320                 HR 1388 HR 1438 HR 1439 HR 1456 HR 1472 HR 1564 HR 1586 HR 1594 ..

Semiround sponge rubber profiles

Semiround sponge rubber profiles

We supply semi-circle profiles of dense EPDM rubber, silicone and EPDM sponge. Our products have a high resistance against chemicals, handle a wide range of temperature differences and have good flexibility. Due to these characteristics they are used for heat resistant equipments and ovens. Thanks to these properties are used for high-temperature distillation equipment and for furnaces. Bumpers, insulators or even finger protectors can be replaced with “D” profiles. This i..

Sponge rubber profiles - round

Sponge rubber profiles - round

The extruded D-section sponge rubber profiles are profile products with low density and made of expanded rubber structure.    Materials: Sponge rubber D-rofiles are created for the area Lighting (Automotive) and as required on special CARPENTRY (Metallic - Electrical Duct).   Density: The density of the sponge rubber D-profiles could vary. By default it's manufactured in 0.65 g/cm³ density.   Applications:  Open-cell ..

Showing 1 to 4 of 4 (1 Pages)