The gasket sheets for gas are used to produce plain and preshaped membranes, complete gasket kits suitable for the most popular pressure reducer/regulators for LPG/Methane used in the automotive and gas industry.
The gas gasket sheets and membranes are made of the best ever and state-of-the-art components, perfectly compatible with the most widely used types of LPG and Methane gaя, oil and gas industry, refining, gas supply pipelines etc.
Donit TESNIT® BA-202 Gasket Sheet
TESNIT® BA-202 gasket sheet is suitable for non-demanding applications in particular the water supply industry. As such, TESNIT® BA-202 has been designed with good mechanical and sealing properties. Chemical resistance against water, gases, oils and fuels is very good. Donit Testnit BA-202 gasket sheet material is very suitable for the sealing application at lower loadings. Gasket material with good resistance to water, gases, fuels and oi..
Donit TESNIT® BA-203 Gasket Sheet
TESNIT® BA-203 is a special gasket material based on aramid fibres and NBR nitrile rubber. It has good resistance to water, gases, oils and fuels. TESNIT® BA-203 covers the medium application loadings. TESNIT® BA-203 is designed for less demanding applications, particularly for shipbuilding. Material is approved by GL / Germanischer Lloyd. Gasket sheets TESNIT® BA-203 also have a good thermal resistance.
The BA-203 gas..
Donit TESNIT® BA-U Gasket Sheet
TESNIT® BA-U gasket sheets combine very good thermal, chemical, and mechanical properties that make TESNIT® BA-U as a general-purpose gasket material. It is well designed for gas and potable water supplies.
COMPOSITION: The BA-U gasket sheet is composed of Aramid fibres, inorganic fillers, NBR binder. Optional steel wire mesh or expanded steel insert on request.
PROPERTIES: The gasket sheet material DONIT TESNIT BA-U is appropriate for..
Gasket Sheet Victor Reinz - AFM 34
Victor Reinz®'s most effective gasket material of all time is AFM 34. This aramid fiber-based classic gasket sheet is absolutely safe from a physiological standpoint and has all of the required approvals (TA-Luft and FDA-compliant, to name a few).
AFM 34 gasket sheet material, which is universally applicable, is the ideal sealing solution for a wide variety of media as well as temperatures and operating pressures.
Highlight: AFM 34 ..
GRAFTEM gasket sheet:
Non-asbestos gasket sheet which combines graphite powder reinforced with aramid fibres and low content of rubber binder system. Available in Economy version on request.
This GRAFTEM gasket sheet is a jointing sheet with excellent mechanical properties is suitable for many applications including fuel, oil, coolants, hydrocarbons, gas and steam...
novaform® SK - The high pressure gasket material for extreme mechanical applications, such as in exhaust pipes or exhaust turbochargers. The matrix of aramid fibres, NBR binder and special agents is reinforced with a galvanised steel wire insert made from a zig-zag construction (1.0314).Application areasnovaform® SK is the ideal choice for use in the exhaust section of diesel engines, for example in shipbuilding:• for extreme thermal and mechanical c..
novamica THERMEX is the gasket material with extremely high temperature stability. It is based on processed phlogopite mica and thus resists to continuous temperatures of up to 1000 degr C.Thanks to expanded metal insertion from stainless steel (AISI 316L/ 1.4404) the novamica THERMEX offers excellent handling and processing characteristics. The combination of expanded metal insert, high-quality phlogopite mica and an optimised low proportion of binder ensures a so far ..
Novaphit 400 is an efficient, flat metal-reinforced graphite gasket made from high-quality pure graphite that is reinforced with an acid-resistant stainless steel insert for many different applications in OEM operations and process industry. Novaphit 400 is, on the other hand, extremely simple and effective processing, even in the case of thin gasket widths and filigree structures.novaphit® 400 is a gasket sheet made from high-quality pure graphite that is reinforced with an ..
Temasil gasket sheet
TEMASIL - Multi-purpose jointing sheet containing highly resistant aramid fibers, temperature-proof fillers joint with special NBR. Thanks to its excellent mechanical properties, the jointing sheet TEMASIL is suitable for water, water vapour, gas, oil, alcohols, fuel, basic chemicals.
Temasil gasket sheets have a Max short-term temperature of 400 °C and Max. lasting temperature 250 °C (steam 200 °C). The high-quality TEMASIL gasket sheets can handl..
Donit TESNIT® BA-CF Gasket Sheet
This type of gasket sheet can handle temperature up to +300°С and pressure up to 120 bar. TESNIT® BA-CF has excellent thermal and chemical resistance to strong alkaline media. TESNIT® BA-CF gasket sheets are suitable for high temperature applications, petrochemicals and for the paper and cellulose industries.
BA-CF is approved by many institutions like: DVGW, KTW, WRc, BAM, and HTB. Material also complies with the requirements of BS 753..
Gasket Sheet Victor Reinz - AFM 30
AFM 30 is a soft gasket sheet composed of synthetic fibers and high-grade elastomers. It's an excellent foundation for seals to hold gases and liquids out. Because of their uniformly efficient properties, AFM 30 and the following gasket materials in this product category are used in a wide range of industries.
The attached technical datasheet contains more detailed materials regarding AFM 30 gasket sheets. If you have any concerns, our..
TESNIT® BA-R Gasket Sheet:
This gasket sheet is suitable for temperatures up to +350°С and pressures up to 140 bar. TESNIT® BA-R has very good mechanical properties (resistance to high internal and surface pressure).
TESNIT® BA-R is based on a mixture of aramid fibres and NBR soft gasketing materials, in combination with special wire reinforcement. Material has an excellent mechanical, dynamic and thermal resistance.
TESNIT® BA-R is used in many applications in the..
GRAFILIT® SL Gasket Sheet
This gasket sheet can handle temperatures up to +550°С and pressure up to 100-140 bar depending on the medium. GRAFILIT® SL is an expanded graphite-based material with stainless steel foil insert, thus facilitating its handling and enhances the surface load. GRAFILIT® SL is a gasket material with excellent strength and creep resistance, chemical stability, and a high tightness rate.
Because of a stainless-steel insertion, it offers easier handl..
Donit MICALIT® F - Mica Gasket Sheet:
The mica gasket sheets of type MICALIT® F can handle up to up to +950°С of temperature - they are made up of a high percentage of phlogopite mica flakes that have been impregnated with silicone.
These mica gasket sheets offer outstanding thermal and chemical qualities, making them ideal for high-temperature applications such as exhaust systems, gas turbines, oil and gas burners, furnaces, and ovens in the automobile and steel indus..
Gasket Sheet Victor Reinz - AFM 31
Victor Reinz®'s AFM 31 is a gasket material that is non-asbestos. It is made up of high-temperature-resistant aramid fibers and various asbestos alternatives. These alternatives are made with high-quality ingredients and high-pressure plus high-temperature elastomers.
AFM 31 gasket sheets are highly conformable gasket material with high compressibility and flexibility, as well as excellent fluid and gas sealability.
Gasket Sheet Vic..
Gasket Sheet Victor Reinz - AFM 37
AFM 37 gasket sheets are a gasket material that doesn't contain asbestos. It's made out of high-temperature-resistant aramide fibers and various asbestos alternatives. These alternatives are made with high-quality ingredients and high-pressure and high-temperature elastomers.
Under moderate pressure circumstances, the AFM 37 gasket sheets offer an excellent cost-to-benefit ratio as a gas and liquid seal.
Gasket Sheet Victor Reinz - ..
Donit GRAFILIT® IQ Gasket Sheet
This gasket sheet can handle temperatures up to +550°С and pressure up to 150-200 bar depending on the medium. GRAFILIT® IQ is made of Expanded natural graphite >99% (initial graphite purity >99%) doped with self-oxidation & flange-corrosion inhibitors, and laminated to expanded chromium–nickel-steel insert (AISI 316L; 0.15 mm)
GRAFILIT® IQ has top-of-the-line graphite-based and stainless steel-reinforced composite construction that combi..
GRAFILIT® SP Gasket Sheet
This graphite metal reinforced gasket sheet can handle temperatures from -200°С up to +550°С and pressure from 60-160 bar depending on the medium. This graphite gasket sheet material is designed for high operating and surface pressures. It has great chemical and thermal resistance with blowout safety.
GRAFILIT® SP is an expanded graphite-based material with a tanged stainless steel insert, thus enhances the surface load and blowout safety. GRAF..
Gasket Sheet Victor Reinz - AFM 22
AFM 22 gasket sheet is the next step on the ladder of the metal-reinforced cylinder head gaskets for combustion engines. When compared with the AFM 20 Victor Reinz gasket sheet, the AFM 22 is capable of addressing almost any operational problem. It is resistant to all of the popular liquid media used in engines and can withstand significant mechanical stress.
The attached technical datasheet contains more detailed materials regarding A..