For water

Gasket sheets for water

The gasket sheets for water ensure that the water is clean, safe and covers almost all components used in municipal water systems. When a gasket is submitted for testing, the formulation is reviewed for prohibited substances, and then tested for contaminants that could leach out of the gasket into the water. This type is usually with low technical parameters regarding pressure and temperature and is used to produce gaskets for Tap water, industrial water, medium hot water, steam, drain air, as well as general gases.


KLINGERSIL® C-4430

KLINGERSIL® C-4430

KLINGERSIL® C-4300 KLINGERsil C-4430 is a premium grade compressed fibre material with exceptional compressive strength good chemical and temperature resistance. C-4430 is based on glass fibre with an NBR binder and can be used for a wide range of chemicals and applications. Manufactured to high specifications and available in a range of thicknesses KLINGERsil C-4430 is often used in the aerospace industry. KLINGERsil C-4430 meets the requirements of BS 7531 Grade X,..

KLINGERSIL® C-4300

KLINGERSIL® C-4300

KLINGERSIL® C-4300 gasket sheets KLINGERSIL® C-4300 is a universal high-pressure gasket sheet suitable for use in a wide range of applications with good stress relaxation. Suitable for hot water, steam, oil, hydrocarbons and many other chemicals. Klingersil C-4300 is considered a general-purpose gasket material. It is dimensionally stable and with a consistent material composition. KLINGERSIL® C-4300 gasket sheets are made of Aramid fibre bonded with NBR. KLINGERS..

Donit TESNIT® BA-202 Gasket Sheet

Donit TESNIT® BA-202 Gasket Sheet

Donit TESNIT® BA-202 Gasket Sheet TESNIT® BA-202 gasket sheet is suitable for non-demanding applications in particular the water supply industry. As such, TESNIT® BA-202 has been designed with good mechanical and sealing properties. Chemical resistance against water, gases, oils and fuels is very good. Donit Testnit BA-202 gasket sheet material is very suitable for the sealing application at lower loadings. Gasket material with good resistance to water, gases, fuels and oi..

Donit TESNIT® BA-203 Gasket Sheet

Donit TESNIT® BA-203 Gasket Sheet

Donit TESNIT® BA-203 Gasket Sheet TESNIT® BA-203 is a special gasket material based on aramid fibres and NBR nitrile rubber. It has good resistance to water, gases, oils and fuels. TESNIT® BA-203 covers the medium application loadings. TESNIT® BA-203 is designed for less demanding applications, particularly for shipbuilding. Material is approved by GL / Germanischer Lloyd. Gasket sheets TESNIT® BA-203 also have a good thermal resistance.  COMPOSITION: The BA-203 gas..

Donit TESNIT® BA-U Gasket Sheet

Donit TESNIT® BA-U Gasket Sheet

Donit TESNIT® BA-U Gasket Sheet TESNIT® BA-U gasket sheets combine very good thermal, chemical, and mechanical properties that make TESNIT® BA-U as a general-purpose gasket material. It is well designed for gas and potable water supplies. COMPOSITION: The BA-U gasket sheet is composed of Aramid fibres, inorganic fillers, NBR binder. Optional steel wire mesh or expanded steel insert on request. PROPERTIES: The gasket sheet material DONIT TESNIT BA-U is appropriate for..

GAMBIT AF-200U gasket sheet

GAMBIT AF-200U gasket sheet

GAMBIT AF-200 Universal gasket sheet is based on Kevlar® aramide fibres, mineral fibres, and fillers bound with NBR rubber-based binder.GAMBIT AF-200 Universal is a versatile, oil resistant sheet designed for applications with the majority of media under medium temperatures and pressures. Environmentally friendly sheet type, free from N-nitrosamines...

Gasket sheet Ferolite NAM 39

Gasket sheet Ferolite NAM 39

Gasket sheet Ferolite NAM 39 Maximum short term temperature: 250°C Maximum continuous temperature: 180°C Maximum temperature in steam: 120°C COMPOSITION: The material Composition of these gasket sheets includes Cellulose Fibre and Mineral Fibre & Organic Fibre + NBR PROPERTIES: Gasket sheets Ferolite NAM 39 are resistant to water and oil and is suitable for low to medium loads. Suitable for low operating pressure, such as transformers and compressors..

Gasket sheet Ferolite NAM 49

Gasket sheet Ferolite NAM 49

Gasket sheet Ferolite NAM 49 Maximum short term temperature: 200°C Maximum continuous temperature: 150°C Maximum temperature in steam: 120°C COMPOSITION: These compressed gasket jointing sheets of excellent quality Ferolite NAM 49 are composed of organic fiber of the highest grade, mineral fiber, NBR binder, and inorganic fillers. PROPERTIES: The gasket sheet material Ferolite NAM 49 is oil-resistant and suited for low to medium loads. Suitable for l..

Gasket Sheet Victor Reinz - AFM 34

Gasket Sheet Victor Reinz - AFM 34

Gasket Sheet Victor Reinz - AFM 34 Victor Reinz®'s most effective gasket material of all time is AFM 34. This aramid fiber-based classic gasket sheet is absolutely safe from a physiological standpoint and has all of the required approvals (TA-Luft and FDA-compliant, to name a few). AFM 34 gasket sheet material, which is universally applicable, is the ideal sealing solution for a wide variety of media as well as temperatures and operating pressures. Highlight: AFM 34 ..

Gasket sheets Gambit AF-153

Gasket sheets Gambit AF-153

Gambit AF-153: A low-parameter sheet, recommended mostly for water supply and sewage mains. GAMBIT AF-153 gasket sheet is based on natural fibres, mineral fibres, and fillers bound with NBR, NR and SBR rubber-based binder...

Gasket sheets KLINGERSIL® C-4400

Gasket sheets KLINGERSIL® C-4400

Gasket sheets KLINGERSIL® C-4400 Universal high-pressure gasket suitable for use in many branches of the chemical industry, the food industry and the water supply ind. Gasket sheets KLINGERSIL® C-4400 are with very high standard of performance. Resistant to oils, water, steam, gases, salt solutions, fuels, alcohols, organic and inorganic acids, hydrocarbons, lubricants and refrigerants. Gasket sheets KLINGERSIL® C-4400 are made of aramid fibres bonded with NBR. KLING..

Gasket sheets KLINGER® top-sil-ML1 Multilayer

Gasket sheets KLINGER® top-sil-ML1 Multilayer

Gasket sheets KLINGER® top-sil-ML1 MultilayerKLINGER® top-sil-ML1 Multilayer is a Unique Multi-Layer material concept – A milestone for fibre reinforced gaskets.Suitable for use with oils, water, steam, gases, salt solutions, fuels, alcohols, moderate organic and inorganic acids, hydrocarbons, lubricants and refrigerants, food industry. Outstanding performance in many applications because of the outer HNBR layers and the inner NBR layer. Revolutionary combinati..

KLINGER®Quantum

KLINGER®Quantum

KLINGER®Quantum is unique gasket material with the highest flexibility at high temperatures, manufactured from a high-quality fibre and filler compound.A high temperature-resistant HNBR matrix is used as the binding agent. Suitable for use in oils, water, steam, gases, salt solutions, fuels, alcohols, weak organic and inorganic acids, hydrocarbons, lubricants and refrigerants.KLINGER®Quantum gasket sheets are optimum combination of synthetic fibres bounded in a high temp..

TEMAFAST gasket sheet

TEMAFAST gasket sheet

TEMAFAST gasket sheet Temafast gasket sheets are an economic version of jointing manufactured from mixtures of organic fibers with NBR as a rubber binder.  The jointing has a wide field of applications in all industrial branches at lower parameters. ..

Temasil gasket sheet

Temasil gasket sheet

Temasil gasket sheet TEMASIL - Multi-purpose jointing sheet containing highly resistant aramid fibers, temperature-proof fillers joint with special NBR. Thanks to its excellent mechanical properties, the jointing sheet TEMASIL is suitable for water, water vapour, gas, oil, alcohols, fuel, basic chemicals. Temasil gasket sheets have a Max short-term temperature of  400 °C and Max. lasting temperature 250 °C (steam 200 °C). The high-quality TEMASIL gasket sheets can handl..

Showing 1 to 15 of 30 (2 Pages)