Applications with intense heat, high pressure or saturated steam can quickly lead to gasket failure if the wrong material is designated for use. Steam can be found in plants in two forms: saturated and superheated. Saturated steam is standard boiler steam and has a definite temperature for each pressure.
Superheated steam is steam at a higher temperature than is found on the saturated steam curve for that particular pressure. We offer gasket sheets in all thicknesses both for superheated steam and for saturated steam.
GAMBIT AF-1000 gasket sheet: Used in high temperature flange joints, in systems with high fluctuations in pressure and medium flow rate. Features high mechanical resistance. Can be used in automotive industry. It is not recommended with acids and bases. When working with steam use suitable mounting clamps. Water, steam, kerosene, gasoline, fuel, and oil resistant.GAMBIT AF-1000 gasket sheet is based on Kevlar® aramide fibres, mineral fibres, and fillers bound with an NBR..
GAMBIT AF-200G: A high parameter sheet, containing special combination of aramide fibres and graphite. The sheet features high elasticity. Recommended for applications with steam, water, fuel, and oil resistant, among others.Gasket sheet GAMBIT AF-200G is based on Kevlar ® aramide fibres, mineral fibres, and fillers bound with NBR rubber-based binder. Kevlar® is a registered trademark of E. I. du Pont de Nemours and Company or its affiliates...
GAMBIT AF-200 Universal gasket sheet is based on Kevlar® aramide fibres, mineral fibres, and fillers bound with NBR rubber-based binder.GAMBIT AF-200 Universal is a versatile, oil resistant sheet designed for applications with the majority of media under medium temperatures and pressures. Environmentally friendly sheet type, free from N-nitrosamines...
GAMBIT AF-300B gasket sheet: An elastic sheet that easily follows all the curves and irregularities of a fl ange. Particularly recommended for water and steam installations, in heating and power generation sector, as well as in municipal companies. The sheet is resistant to brake and cooling liquids, thus it is recommended for automotive applications.Gasket sheet GAMBIT AF - 300 is based on Kevlar ® aramide fibres, mineral fibres, and fillers bound with NBR, NR and ..
GAMBITGRAF LUX®: Applied in high temperature and pressure. Recommended to steam, carbohydrates and most of chemical compounds except strong oxidants. GAMBITGRAF LUX® gasket sheets are resistant to mechanical and thermal cycles as well as to rapid changes of temperature.GAMBITGRAF LUX® is made of 99.5% pure expanded graphite foil, reinforced with 0.1mm thick AISI 316L perforated metal sheet. Sulphur content:–max. 300 ppm. Chlorides content: max. 50 ppm...
Gasket Sheet Victor Reinz - AFM 34
Victor Reinz®'s most effective gasket material of all time is AFM 34. This aramid fiber-based classic gasket sheet is absolutely safe from a physiological standpoint and has all of the required approvals (TA-Luft and FDA-compliant, to name a few).
AFM 34 gasket sheet material, which is universally applicable, is the ideal sealing solution for a wide variety of media as well as temperatures and operating pressures.
Highlight: AFM 34 ..
Gasket sheets KLINGERSIL® C-4400
Universal high-pressure gasket suitable for use in many branches of the chemical industry, the food industry and the water supply ind. Gasket sheets KLINGERSIL® C-4400 are with very high standard of performance.
Resistant to oils, water, steam, gases, salt solutions, fuels, alcohols, organic and inorganic acids, hydrocarbons, lubricants and refrigerants. Gasket sheets KLINGERSIL® C-4400 are made of aramid fibres bonded with NBR.
Gasket sheets KLINGER® top-graph2000
This is really flexible graphite sealing material with a high degree of inherent stability that offers reliability in handling. Thanks to its high load-bearing capacity and low embrittlement, KLINGERtop-graph-2000 is ideally suited for use with steam and other sophisticated applications.
The material impresses with its good handling in combination with its very high level of load bearing capacity and minimal embrittlement at temperat..
Gasket sheets KLINGER® top-sil-ML1 MultilayerKLINGER® top-sil-ML1 Multilayer is a Unique Multi-Layer material concept – A milestone for fibre reinforced gaskets.Suitable for use with oils, water, steam, gases, salt solutions, fuels, alcohols, moderate organic and inorganic acids, hydrocarbons, lubricants and refrigerants, food industry. Outstanding performance in many applications because of the outer HNBR layers and the inner NBR layer. Revolutionary combinati..
GRAFTEM gasket sheet:
Non-asbestos gasket sheet which combines graphite powder reinforced with aramid fibres and low content of rubber binder system. Available in Economy version on request.
This GRAFTEM gasket sheet is a jointing sheet with excellent mechanical properties is suitable for many applications including fuel, oil, coolants, hydrocarbons, gas and steam.
KLINGERSIL® C-4300 is an universal high-pressure gasket sheet suitable for use in a wide range of applications with good stress relaxation. Suitable for hot water, steam, oil, hydrocarbons and many other chemicals.
KLINGERSIL® C-4300 gasket sheets are made ofAramid fibre bonded with NBR.
KLINGERSIL® C-4300 is a registered trademark of Rich. Klinger Dichtungstechnik GmbH & Co KG
KLINGER®Quantum is unique gasket material with the highest flexibility at high temperatures, manufactured from a high-quality fibre and filler compound.A high temperature-resistant HNBR matrix is used as the binding agent. Suitable for use in oils, water, steam, gases, salt solutions, fuels, alcohols, weak organic and inorganic acids, hydrocarbons, lubricants and refrigerants.KLINGER®Quantum gasket sheets are optimum combination of synthetic fibres bounded in a high temp..
Novaphit 400 is an efficient, flat metal-reinforced graphite gasket made from high-quality pure graphite that is reinforced with an acid-resistant stainless steel insert for many different applications in OEM operations and process industry. Novaphit 400 is, on the other hand, extremely simple and effective processing, even in the case of thin gasket widths and filigree structures.novaphit® 400 is a gasket sheet made from high-quality pure graphite that is reinforced with an ..
novaphit SSTC is a graphite gasket material with an insert of acid-proof stainless steel (1.4404, AISI 316 L) for the highest pressure and temperature requirements. An excellent media resistance and the safety aspect, even in applications with changing loads, make this material superior. The expanded metal layer, due to its three-dimensional, non-intersecting geometry, is superior to standard graphite gaskets with tanged and flat metal inserts, and shows its recovery properti..
Novapress® 880 Gasket sheets
The soft gasket sheet NOVAPRESS® 880 is a sealing material based on aramid fibers and provided with special functional fillers and a PTFE non-stick coating. The binder used here is an NBR rubber mixture.
Compared to standard fiber gaskets, the new gasket product novapress 880 offers three times greater adaptability. This enables safe TA Luft models in accordance with VDI 2290 and with enhanced assembly safety to be used with the gasket mater..