GAMBITGRAF LUX®: Applied in high temperature and pressure. Recommended to steam, carbohydrates and most of chemical compounds except strong oxidants. GAMBITGRAF LUX® gasket sheets are resistant to mechanical and thermal cycles as well as to rapid changes of temperature.GAMBITGRAF LUX® is made of 99.5% pure expanded graphite foil, reinforced with 0.1mm thick AISI 316L perforated metal sheet. Sulphur content:–max. 300 ppm. Chlorides content: max. 50 ppm...
Gasket sheets KLINGER® top-graph2000This is really flexible graphite sealing material with a high degree of inherent stability offers reliability in handling. Thanks to its high load bearing capacity and the low embrittlement, KLINGERtop-graph-2000 is ideally suited for use with steam and other sophisticated applications.The material impresses with its good handling in combination with its very high level of load bearing capacity and minimal embrittlement at temperatures..
novaform® SK - The high pressure gasket material for extreme mechanical applications, such as in exhaust pipes or exhaust turbochargers. The matrix of aramid fibres, NBR binder and special agents is reinforced with a galvanised steel wire insert made from a zig-zag construction (1.0314).Application areasnovaform® SK is the ideal choice for use in the exhaust section of diesel engines, for example in shipbuilding:• for extreme thermal and mechanical c..
novamica THERMEX is the gasket material with extremely high temperature stability. It is based on processed phlogopite mica and thus resists to continuous temperatures of up to 1000 degr C.Thanks to expanded metal insertion from stainless steel (AISI 316L/ 1.4404) the novamica THERMEX offers excellent handling and processing characteristics. The combination of expanded metal insert, high-quality phlogopite mica and an optimised low proportion of binder ensures a so far ..
Novaphit 400 is an efficient, flat metal-reinforced graphite gasket made from high-quality pure graphite that is reinforced with an acid-resistant stainless steel insert for many different applications in OEM operations and process industry. Novaphit 400 is, on the other hand, extremely simple and effective processing, even in the case of thin gasket widths and filigree structures.novaphit® 400 is a gasket sheet made from high-quality pure graphite that is reinforced with an ..
novaphit SSTC is a graphite gasket material with an insert of acid-proof stainless steel (1.4404, AISI 316 L) for the highest pressure and temperature requirements. An excellent media resistance and the safety aspect, even in applications with changing loads, make this material superior. The expanded metal layer, due to its three-dimensional, non-intersecting geometry, is superior to standard graphite gaskets with tanged and flat metal inserts, and shows its recovery properti..
Temagraph Fi is a reinforced jointing sheet manufactured from pure graphite with one ore more glued flat stainless insertions which are bonded using a chloride-free adhesive layer. The scope of applications for Temagraph Fi gasket sheets includes high service pressures and temperatures including steam and therefore, it can be used in a wide range of applications in chemistry, petrochemistry, etc...
TEMAGRAPH HP gasket sheet
Temagraph HP is high integrity, multilayer sheet material with outstanding mechanical strength. It is designed for higher pressure and temperature applications and for flange connections where resistance to high bolt loading is required.
Temagraph HP is manufactured from the purity expanded graphite foil reinforced with a number of perforated steel inserts without the use of adhesive.
This sandwich design confers high compressive strength to..