with graphite
Graphite gasket sheets - reinforced with metal insert and their high thermal conductivity ensures rapid heat dissipation and allows high temperature capability (except in oxidizing atmospheres).
Our graphite gasket sheets made from graphite flake material excel in extreme conditions, withstanding heat, pressure and aggressive/corrosive chemical environments to retain stability and sealing performance in high temperatures and pressure fluctuations.
Graphite gasket sheets are often reinforced with a stainless steel insert.
GAMBIT AF-200G gasket sheet
GAMBIT AF-200G: A high parameter sheet, containing special combination of aramide fibres and graphite. The sheet features high elasticity. Recommended for applications with steam, water, fuel, and oil resistant, among others.Gasket sheet GAMBIT AF-200G is based on Kevlar ® aramide fibres, mineral fibres, and fillers bound with NBR rubber-based binder. Kevlar® is a registered trademark of E. I. du Pont de Nemours and Company or its affiliates...
GAMBITGRAF LUX®
GAMBITGRAF LUX®: Applied in high temperature and pressure. Recommended to steam, carbohydrates and most of chemical compounds except strong oxidants. GAMBITGRAF LUX® gasket sheets are resistant to mechanical and thermal cycles as well as to rapid changes of temperature.GAMBITGRAF LUX® is made of 99.5% pure expanded graphite foil, reinforced with 0.1mm thick AISI 316L perforated metal sheet. Sulphur content:–max. 300 ppm. Chlorides content: max. 50 ppm...
Gasket sheets KLINGER® top-graph2000
Gasket sheets KLINGER® top-graph2000 This is really flexible graphite sealing material with a high degree of inherent stability that offers reliability in handling. Thanks to its high load-bearing capacity and low embrittlement, KLINGERtop-graph-2000 is ideally suited for use with steam and other sophisticated applications. The material impresses with its good handling in combination with its very high level of load bearing capacity and minimal embrittlement at temperat..
GRAFTEM gasket sheet
GRAFTEM gasket sheet: Non-asbestos gasket sheet which combines graphite powder reinforced with aramid fibres and low content of rubber binder system. Available in Economy version on request. This GRAFTEM gasket sheet is a jointing sheet with excellent mechanical properties is suitable for many applications including fuel, oil, coolants, hydrocarbons, gas and steam...
Novaphit 400 Gasket sheets
Novaphit 400 Gasket sheets Novaphit 400 is an efficient, flat metal-reinforced graphite gasket made from high-quality pure graphite that is reinforced with an acid-resistant stainless steel insert for many different applications in OEM operations and process industry. Novaphit 400 is, on the other hand, extremely simple and effective processing, even in the case of thin gasket widths and filigree structures. novaphit® 400 is a gasket sheet made from high-quality pur..
novaphit SSTC
novaphit SSTC Gasket sheets novaphit SSTC is a graphite gasket material with an insert of acid-proof stainless steel (1.4404, AISI 316 L) for the highest pressure and temperature requirements. An excellent media resistance and the safety aspect, even in applications with changing loads, make this material superior. The expanded metal layer, due to its three-dimensional, non-intersecting geometry, is superior to standard graphite gaskets with tanged and flat metal inser..
novatec PREMIUM XP Gasket sheets
novatec PREMIUM XP Gasket sheets novatec PREMIUM XP is the new and more efficient "Extended Performance” (XP) generation of graphite gaskets reinforced with aramid fibres that have been developed by Frenzelit. A considerable reduction in leakage and at the same time, excellent residual stress and chemical resistance levels are achieved thanks to careful graphite structural design and ingenious process engineering. With novatec PREMIUM XP gasket sheets it..
PARO-GAMBIT gasket sheet
PARO-GAMBIT gasket sheetA high performance sheet, recommended mostly for installations working with steam. PARO-GAMBIT gasket sheet is based on carbon fibres, mineral fibres, and fillers bound with NBR rubber-based binder...
TEMACARB gasket sheet
Temacarb gasket sheet TEMACARB special jointing sheets, manufactured from carbon fibers and special additives joint blended with high-quality NBR binder. TEMACARB gasket sheets can be used especially for higher temperatures and pressures, mainly for superheated steam. Also suitable for alkaline media. These versatile paranite sheets are especially suitable for use in alkaline media, they creep resistant and are also suitable for sealing against steam, lubricants, diffe..
TEMAGRAPH Fi gasket sheet
Temagraph Fi is a reinforced jointing sheet manufactured from pure graphite with one ore more glued flat stainless insertions which are bonded using a chloride-free adhesive layer. The scope of applications for Temagraph Fi gasket sheets includes high service pressures and temperatures including steam and therefore, it can be used in a wide range of applications in chemistry, petrochemistry, etc...
TEMAGRAPH HP gasket sheet
TEMAGRAPH HP gasket sheet Temagraph HP is high integrity, multilayer sheet material with outstanding mechanical strength. It is designed for higher pressure and temperature applications and for flange connections where resistance to high bolt loading is required. Temagraph HP is manufactured from the purity expanded graphite foil reinforced with a number of perforated steel inserts without the use of adhesive. This sandwich design confers high compressive strength to..
Donit TESNIT® BA-CF Gasket Sheet
Donit TESNIT® BA-CF Gasket Sheet This type of gasket sheet can handle temperature up to +300°С and pressure up to 120 bar. TESNIT® BA-CF has excellent thermal and chemical resistance to strong alkaline media. TESNIT® BA-CF gasket sheets are suitable for high temperature applications, petrochemicals and for the paper and cellulose industries. BA-CF is approved by many institutions like: DVGW, KTW, WRc, BAM, and HTB. Material also complies with the requirements of BS 753..
Donit GRAFILIT® SL Gasket Sheet
GRAFILIT® SL Gasket Sheet This gasket sheet can handle temperatures up to +550°С and pressure up to 100-140 bar depending on the medium. GRAFILIT® SL is an expanded graphite-based material with stainless steel foil insert, thus facilitating its handling and enhances the surface load. GRAFILIT® SL is a gasket material with excellent strength and creep resistance, chemical stability, and a high tightness rate. Because of a stainless-steel insertion, it offers easier handl..
Donit GRAFILIT® IQ Gasket Sheet
Donit GRAFILIT® IQ Gasket Sheet This gasket sheet can handle temperatures up to +550°С and pressure up to 150-200 bar depending on the medium. GRAFILIT® IQ is made of Expanded natural graphite >99% (initial graphite purity >99%) doped with self-oxidation & flange-corrosion inhibitors, and laminated to expanded chromium–nickel-steel insert (AISI 316L; 0.15 mm) GRAFILIT® IQ has top-of-the-line graphite-based and stainless steel-reinforced composite construction that combi..
Donit GRAFILIT® SP Gasket Sheet
GRAFILIT® SP Gasket Sheet This graphite metal reinforced gasket sheet can handle temperatures from -200°С up to +550°С and pressure from 60-160 bar depending on the medium. This graphite gasket sheet material is designed for high operating and surface pressures. It has great chemical and thermal resistance with blowout safety. GRAFILIT® SP is an expanded graphite-based material with a tanged stainless steel insert, thus enhances the surface load and blowout safety. GRAF..
Donit DONIFLEX® G-U Gasket sheet
Donit DONIFLEX® G-U Gasket sheet It can handle temperatures up to +350°С and pressure up to 100-150 bar depending on the medium. This graphite-based composite Doniflex G-U, which includes aramid and unique functional inorganics but has no organic solvents, is a sophisticated heavy-duty material. It has outstanding physical and chemical characteristics (thermal, chemical, stress resistance, etc.), is very compressible, and is flexible, allowing it to adapt to irregular ..