The metal reinforced gasket sheets a rigid laminated gasket sheet consisting of graphite, mica, or NBR+aramide layers bonded to each face of a solid steel core in the form of tanged metal plate, wire mesh or stainless steel foil.
The metal reinforced gasket sheets provide strength for handling, often bonding high temp materials that would be weak if unsupported, creating a robust material with the metal-reinforcement. Handling in installation is a huge benefit. The tang core of the metal insert gasket sheet provides a physical barrier and containment mechanism to hold the facing in place over the life of the joint.
The tangs create a “load stop” and structure, shouldering the load and preventing the facing from crushing under high load spots.
GAMBIT AF-1000 gasket sheet: Used in high temperature flange joints, in systems with high fluctuations in pressure and medium flow rate. Features high mechanical resistance. Can be used in automotive industry. It is not recommended with acids and bases. When working with steam use suitable mounting clamps. Water, steam, kerosene, gasoline, fuel, and oil resistant.GAMBIT AF-1000 gasket sheet is based on Kevlar® aramide fibres, mineral fibres, and fillers bound with an NBR..
GAMBITGRAF LUX®: Applied in high temperature and pressure. Recommended to steam, carbohydrates and most of chemical compounds except strong oxidants. GAMBITGRAF LUX® gasket sheets are resistant to mechanical and thermal cycles as well as to rapid changes of temperature.GAMBITGRAF LUX® is made of 99.5% pure expanded graphite foil, reinforced with 0.1mm thick AISI 316L perforated metal sheet. Sulphur content:–max. 300 ppm. Chlorides content: max. 50 ppm...
novaform® SK - The high pressure gasket material for extreme mechanical applications, such as in exhaust pipes or exhaust turbochargers. The matrix of aramid fibres, NBR binder and special agents is reinforced with a galvanised steel wire insert made from a zig-zag construction (1.0314).Application areasnovaform® SK is the ideal choice for use in the exhaust section of diesel engines, for example in shipbuilding:• for extreme thermal and mechanical c..
novamica THERMEX is the gasket material with extremely high temperature stability. It is based on processed phlogopite mica and thus resists to continuous temperatures of up to 1000 degr C.Thanks to expanded metal insertion from stainless steel (AISI 316L/ 1.4404) the novamica THERMEX offers excellent handling and processing characteristics. The combination of expanded metal insert, high-quality phlogopite mica and an optimised low proportion of binder ensures a so far ..
Novaphit 400 is an efficient, flat metal-reinforced graphite gasket made from high-quality pure graphite that is reinforced with an acid-resistant stainless steel insert for many different applications in OEM operations and process industry. Novaphit 400 is, on the other hand, extremely simple and effective processing, even in the case of thin gasket widths and filigree structures.novaphit® 400 is a gasket sheet made from high-quality pure graphite that is reinforced with an ..
novaphit SSTC is a graphite gasket material with an insert of acid-proof stainless steel (1.4404, AISI 316 L) for the highest pressure and temperature requirements. An excellent media resistance and the safety aspect, even in applications with changing loads, make this material superior. The expanded metal layer, due to its three-dimensional, non-intersecting geometry, is superior to standard graphite gaskets with tanged and flat metal inserts, and shows its recovery properti..
Temagraph Fi is a reinforced jointing sheet manufactured from pure graphite with one ore more glued flat stainless insertions which are bonded using a chloride-free adhesive layer. The scope of applications for Temagraph Fi gasket sheets includes high service pressures and temperatures including steam and therefore, it can be used in a wide range of applications in chemistry, petrochemistry, etc...
Temagraph HP is high integrity, multilayer sheet material with outstanding mechanical strength. It is designed for higher pressure and temperature applications and for flange connections where resistance to high bolt loading is required. Temagraph HP is manufactured from the purity expanded graphite foil reinforced with a number of perforated steel inserts without the use of adhesive.This sandwich design confers high compressive strength to the material making it su..
TESNIT® BA-R Gasket Sheet:
This gasket sheet is suitable for temperatures up to +350°С and pressure up to 140 bar. TESNIT® BA-R has very good mechanical properties (resistance to high internal and surface pressure).
TESNIT® BA-R is based on a mixture of aramid fibres and NBR soft gasketing materials, in combination with special wire reinforcement. Material has excellent mechanical, dynamic and thermal resistance.