WRAS gasket sheet material Approval: Non-metallic materials & components, such as gasket sheet material & ‘O’ rings, undergo testing only for their effects on water quality. This type of approval demonstrates that the non-metallic material/component does not itself contaminate the water and therefore satisfies this particular requirement of regulations.
KLINGERsil C-4430 is a premium grade compressed fibre material with exceptional compressive strength good chemical and temperature resistance. C-4430 is based on glass fibre with an NBR binder and can be used for a wide range of chemicals and applications.
Manufactured to high specifications and available in a range of thicknesses KLINGERsil C-4430 is often used in the aerospace industry.
KLINGERsil C-4430 meets the requirements of BS 7531 Grade X,..
KLINGERSIL® C-4300 gasket sheets
KLINGERSIL® C-4300 is a universal high-pressure gasket sheet suitable for use in a wide range of applications with good stress relaxation. Suitable for hot water, steam, oil, hydrocarbons and many other chemicals.
Klingersil C-4300 is considered a general-purpose gasket material. It is dimensionally stable and with a consistent material composition.
KLINGERSIL® C-4300 gasket sheets are made of Aramid fibre bonded with NBR.
Donit TESNIT® BA-U Gasket Sheet
TESNIT® BA-U gasket sheets combine very good thermal, chemical, and mechanical properties that make TESNIT® BA-U as a general-purpose gasket material. It is well designed for gas and potable water supplies.
COMPOSITION: The BA-U gasket sheet is composed of Aramid fibres, inorganic fillers, NBR binder. Optional steel wire mesh or expanded steel insert on request.
PROPERTIES: The gasket sheet material DONIT TESNIT BA-U is appropriate for..
Gambit AF-153: A low-parameter sheet, recommended mostly for water supply and sewage mains. GAMBIT AF-153 gasket sheet is based on natural fibres, mineral fibres, and fillers bound with NBR, NR and SBR rubber-based binder...
Gasket sheets KLINGER® top-sil-ML1 MultilayerKLINGER® top-sil-ML1 Multilayer is a Unique Multi-Layer material concept – A milestone for fibre reinforced gaskets.Suitable for use with oils, water, steam, gases, salt solutions, fuels, alcohols, moderate organic and inorganic acids, hydrocarbons, lubricants and refrigerants, food industry. Outstanding performance in many applications because of the outer HNBR layers and the inner NBR layer. Revolutionary combinati..
KLINGER®Quantum is unique gasket material with the highest flexibility at high temperatures, manufactured from a high-quality fibre and filler compound.A high temperature-resistant HNBR matrix is used as the binding agent. Suitable for use in oils, water, steam, gases, salt solutions, fuels, alcohols, weak organic and inorganic acids, hydrocarbons, lubricants and refrigerants.KLINGER®Quantum gasket sheets are optimum combination of synthetic fibres bounded in a high temp..
novaphit SSTC is a graphite gasket material with an insert of acid-proof stainless steel (1.4404, AISI 316 L) for the highest pressure and temperature requirements. An excellent media resistance and the safety aspect, even in applications with changing loads, make this material superior. The expanded metal layer, due to its three-dimensional, non-intersecting geometry, is superior to standard graphite gaskets with tanged and flat metal inserts, and shows its recovery properti..
novatec PREMIUM XP is the new and more efficient "Extended Performance” (XP) generation of graphite gaskets reinforced with aramid fibres that have been developed by Frenzelit. A considerable reduction in leakage and at the same time, excellent residual stress and chemical resistance levels are achieved thanks to careful graphite structural design and ingenious process engineering.With novatec PREMIUM XP gasket sheets it is possible to configure gasket systems in accorda..
Donit TESNIT® BA-M Gasket Sheet
TESNIT® BA-M gasket sheets offer excellent thermal resistance and mechanical properties (especially bolt torque retention), which permits TESNIT® BA-M gasket sheets can be used in a very wide range of industrial applications, mainly in steam supply, heating and cooling systems.
COMPOSITION: The BA-M gasket sheet is engineered from bio-soluble mineral fibres, aramid fibres, inorganic fillers, NBR binder. Optional steel wire mesh or expande..
Donit TESNIT® BA-GL Gasket Sheet
The gasket sheet of type TESNIT® BA-GL has great thermal and chemical resistance and excellent mechanical properties, especially bolt torque retention. Thus, TESNIT® BA-GL is particularly suited for gas and steam supplies, heating systems, pumps and compressors. This gasket sheet is approved for marine use from registers as DNV GL and ABS.
COMPOSITION: The BA-GL gasket sheets consists of glass fibres, aramid fibres, inorganic fillers, NB..
Donit DONIFLON® 2020 - Silica Modified PTFE Gasket Sheet
DONIFLON® 2020 is a silica-filled, structurally strengthened modified PTFE gasket sheet. It has excellent chemical resistance to different media, comparable to DONIFLON® 900E; especially recommended in all concentrations for inorganic acids with the exception of hydrofluoric acid.
The silica modified PTFE gasket sheet can be used with Oxygen and has approvals from EN 12308, EU No. 10/2011 and FDA for food contact ..
Novapress® Basic Gasket Sheet
A great standard material for usage in medium pressure and temperature ranges is novapress® BASIC. Gasket sheet combines performance with cost-effectiveness for a variety of applications, including shipbuilding, the food industry, gas and water delivery, and the manufacture of machines. The material has the following unique qualities as a result of its balanced composition:
good residual stress and medium resistance
minimal gas leaks