Germanischer Lloyd (GL). approval - Sealing materials are tested for applications in ship’s piping systems according to GL approval system. According to SOLAS 74 materials also have asbestos free compliance.
KLINGERSIL® C-4300
KLINGERsil C-4430 is a premium grade compressed fibre material with exceptional compressive strength good chemical and temperature resistance. C-4430 is based on glass fibre with an NBR binder and can be used for a wide range of chemicals and applications.
Manufactured to high specifications and available in a range of thicknesses KLINGERsil C-4430 is often used in the aerospace industry.
KLINGERsil C-4430 meets the requirements of BS 7531 Grade X,..
KLINGERSIL® C-4300 gasket sheets
KLINGERSIL® C-4300 is a universal high-pressure gasket sheet suitable for use in a wide range of applications with good stress relaxation. Suitable for hot water, steam, oil, hydrocarbons and many other chemicals.
Klingersil C-4300 is considered a general-purpose gasket material. It is dimensionally stable and with a consistent material composition.
KLINGERSIL® C-4300 gasket sheets are made of Aramid fibre bonded with NBR.
KLINGERS..
Donit TESNIT® BA-203 Gasket Sheet
TESNIT® BA-203 is a special gasket material based on aramid fibres and NBR nitrile rubber. It has good resistance to water, gases, oils and fuels. TESNIT® BA-203 covers the medium application loadings. TESNIT® BA-203 is designed for less demanding applications, particularly for shipbuilding. Material is approved by GL / Germanischer Lloyd. Gasket sheets TESNIT® BA-203 also have a good thermal resistance.
COMPOSITION:
The BA-203 gas..
Donit TESNIT® BA-U Gasket Sheet
TESNIT® BA-U gasket sheets combine very good thermal, chemical, and mechanical properties that make TESNIT® BA-U as a general-purpose gasket material. It is well designed for gas and potable water supplies.
COMPOSITION: The BA-U gasket sheet is composed of Aramid fibres, inorganic fillers, NBR binder. Optional steel wire mesh or expanded steel insert on request.
PROPERTIES: The gasket sheet material DONIT TESNIT BA-U is appropriate for..
GAMBIT AF-1000 gasket sheet: Used in high temperature flange joints, in systems with high fluctuations in pressure and medium flow rate. Features high mechanical resistance. Can be used in automotive industry. It is not recommended with acids and bases. When working with steam use suitable mounting clamps. Water, steam, kerosene, gasoline, fuel, and oil resistant.GAMBIT AF-1000 gasket sheet is based on Kevlar® aramide fibres, mineral fibres, and fillers bound with an NBR..
GAMBIT AF-200 Universal gasket sheet is based on Kevlar® aramide fibres, mineral fibres, and fillers bound with NBR rubber-based binder.GAMBIT AF-200 Universal is a versatile, oil resistant sheet designed for applications with the majority of media under medium temperatures and pressures. Environmentally friendly sheet type, free from N-nitrosamines...
Gambit AF-OIL: Oil-resistant gasket sheet, recommended for high temperatures and pressures. Designed for application in supervised joints. Suitable for natural gas and drinking water installations. Also recommended for applications with water, steam, fuels, oils, brine, natural gas, propane butane...
Gasket Sheet Victor Reinz - AFM 34
Victor Reinz®'s most effective gasket material of all time is AFM 34. This aramid fiber-based classic gasket sheet is absolutely safe from a physiological standpoint and has all of the required approvals (TA-Luft and FDA-compliant, to name a few).
AFM 34 gasket sheet material, which is universally applicable, is the ideal sealing solution for a wide variety of media as well as temperatures and operating pressures.
Highlight: AFM 34 ..
Gasket sheets KLINGERSIL® C-4400
Universal high-pressure gasket suitable for use in many branches of the chemical industry, the food industry and the water supply ind. Gasket sheets KLINGERSIL® C-4400 are with very high standard of performance.
Resistant to oils, water, steam, gases, salt solutions, fuels, alcohols, organic and inorganic acids, hydrocarbons, lubricants and refrigerants. Gasket sheets KLINGERSIL® C-4400 are made of aramid fibres bonded with NBR.
KLING..
Gasket sheets KLINGER® top-chem2000The universal heavy-duty gasket for an extremely wide range of applications in the chemical and petrochemical industries as well as in the ship building industry for chemical tanker applications. Due to its unique load bearing properties it is able to withstand high temperatures and pressures and it is the only PTFE gasket with a Fire Safe Certificate. It is also the first choice in the food sector and in the pharmaceutical industry, for ste..
Gasket sheets KLINGER® top-graph2000
This is really flexible graphite sealing material with a high degree of inherent stability that offers reliability in handling. Thanks to its high load-bearing capacity and low embrittlement, KLINGERtop-graph-2000 is ideally suited for use with steam and other sophisticated applications.
The material impresses with its good handling in combination with its very high level of load bearing capacity and minimal embrittlement at temperat..
Gasket sheets KLINGER® top-sil-ML1 MultilayerKLINGER® top-sil-ML1 Multilayer is a Unique Multi-Layer material concept – A milestone for fibre reinforced gaskets.Suitable for use with oils, water, steam, gases, salt solutions, fuels, alcohols, moderate organic and inorganic acids, hydrocarbons, lubricants and refrigerants, food industry. Outstanding performance in many applications because of the outer HNBR layers and the inner NBR layer. Revolutionary combinati..
Gasket sheets KLINGERSIL® C-8200 are a compressed fibre material developed to be used with a broad range of chemicals with particularly good resistance to strong acids and alkalis. KLINGERSIL® C-8200 is an economical alternative to PTFE based materials in applications are less aggressive.C-8200 has TA-Luft (Clean Air) approval.Resistant to most mineral acids;resistant to ketones, aldehydes, alkalis;resistant to many refrigerants,resistant to oil, fuels, hydrocarbons..
KLINGER®Quantum is unique gasket material with the highest flexibility at high temperatures, manufactured from a high-quality fibre and filler compound.A high temperature-resistant HNBR matrix is used as the binding agent. Suitable for use in oils, water, steam, gases, salt solutions, fuels, alcohols, weak organic and inorganic acids, hydrocarbons, lubricants and refrigerants.KLINGER®Quantum gasket sheets are optimum combination of synthetic fibres bounded in a high temp..
Novaflon® 100 Gasket sheets
novaflon® 100 is a gasket material made of modified PTFE filled with hollow glass microspheres. It's used in the general and chemical industry.
Thanks to its extremely high compressibility, novaflon® 100 is eminently suitable for use in stress-sensitive flanges, such as glass, ceramic and FRP flanges. Very good anti-stick properties are an outstanding feature of the all-purpose gasket made from modified PTFE. Downt..
Novaflon® 200 Gasket sheets
novaflon® 200 is a gasket material made of modified PTFE filled with hollow glass microspheres. It's used in the general and chemical industry.
Modified PTFE with barium sulphate - novaflon® 200 has the best chemical resistance to strong alkalis. High mechanical resistance, high pressure resistance (vacuum to 83 bar) and strongly optimised creep properties are convi..
Novaflon® 300 Gasket sheets
novaflon® 300 - Modified PTFE with silica. novaflon® 300 offers a very good balance between chemical resistance and reduced creep properties. The flat gasket is not affected by concentrated acids either (except for hydrofluorides). The all-purpose gasket made from modified PTFE is therefore the product of choice for process industry applications. High mechanical resistance at ..
Novaflon® 500 Gasket sheets
novaflon ® is the family name of Frenzelit´s latest product range based on modified and multi-directional expanded PTFE materials. Its improved performance compared to conventional PTFE and its superior chemical resistance completes our range of products.
The novaflon ® product family members have received multiple approvals and meet or exceed the strictest European fugitive emissions standards.
Frenzelit's novaflon ® products are predesti..
novaform SK Gasket sheets
novaform® SK - The high pressure gasket material for extreme mechanical applications, such as in exhaust pipes or exhaust turbochargers. The matrix of aramid fibres, NBR binder and special agents is reinforced with a galvanised steel wire insert made from a zig-zag construction (1.0314).
Application areas
novaform® SK is the ideal choice for use in the exhaust section of diesel engines, for example in shipbuildin..
novaphit SSTC Gasket sheets
novaphit SSTC is a graphite gasket material with an insert of acid-proof stainless steel (1.4404, AISI 316 L) for the highest pressure and temperature requirements. An excellent media resistance and the safety aspect, even in applications with changing loads, make this material superior.
The expanded metal layer, due to its three-dimensional, non-intersecting geometry, is superior to standard graphite gaskets with tanged and flat metal inser..