NBR rubber expansion joints

The flexible NBR rubber expansion joints are used for absorbing thermal expansion and reduction of vibrations in pipe systems. This type of rubber expansion joint has an overall length of 90 or 130 mm for all sizes. The rubber sealing surface makes the use of gaskets unnecessarily.

Applicable fluids: 

water, warm water, oil, solvents and greases.

The NBR expansion joints are not suitable for hot water (100°C) and steam. For high vacuum a vacuum spiral NBR rubber expansion joint must be used.

The NBR rubber expansion joint has good general resistance to oils and hydrocarbons. The rubber expansion joint made of NBR offers good mechanical properties especially tensile strength, flexibility, compression set and impermeability to gases.

The NBR bellow of this rubber expansion joint has moderate aging properties and is known for its good abrasion resistance.


Full Face Rubber Flange Rubber expansion joint

Full Face Rubber Flange Rubber expansion joint

Description Expansion Joints with Full Face Rubber Flange. The full face flanges are integral with the body of the joint and drilled to conform the bolt pattern of the companion flanges of the pipe line. These are high quality "custom-made” Expansion Joints supplied with split or fixed flanges in carbon steel as standard. Body: EPDM, EPDM ..

Rubber expansion joint ERV-G YELLOWBAND

Rubber expansion joint ERV-G YELLOWBAND

ERV-G YELLOWBAND rubber expansion joint is made of NBR (nitrile), seamless, abrasion resistant liner with PA textile cord reinforcement and Chloroprene CR cover. Suitable for Petroleum based products, fuel ethanol blend e.g. E 85 and DIN EN fuels up to 50% aromatic content, also town gas and natural gas, except for LP gas. Temperature range for..

Rubber expansion joint ERV-G YellowBandLT

Rubber expansion joint ERV-G YellowBandLT

The rubber expansion joints ERV-G YellowBandLT - are made of NBR (nitrile), seamless, high abrasion resistance liner with PA textile cord reinforcement and Chloroprene CR cover. Suitable for Low temperature applications for petroleum based products, diesel, heating oil up to +90°C, aviation fuel JET A1, kerosene, petroleum up to +60°C and gasol..

Rubber expansion joint ERV-GS YellowSteel

Rubber expansion joint ERV-GS YellowSteel

YellowBand ERV-GS - NBR (nitrile), seamless, abrasion resistant liner with Steel wire cord reinforcement and Chloroprene CR cover. Suitable for Petroleum based products, DIN EN fuels up to 50% aromatic content, cooling water with oily anticorrosion additives, lubrication and hydraulic oil, seawater. Temperature range -20°C up to +90°C, temp..

Rubber expansion joint ERV-GS-HNBR YellowSteel

Rubber expansion joint ERV-GS-HNBR YellowSteel

Rubber expansion joints ERV-GS-HNBR YellowSteel - HNBR (nitrile), seamless, high abrasion resistance liner with Steel wire cord reinforcement and Chloroprene CR cover. Suitable for Petroleum based products, DIN EN fuels up to 50% aromatic content, cooling water with oily anticorrosion additives, lubrication and hydraulic oil, seawater. Very goo..

Rubber expansion joint ERV-OR OrangeBand

Rubber expansion joint ERV-OR OrangeBand

Rubber expansion joint OrangeBand ERV-OR- NBR (nitrile), seamless liner with PA textile cord reinforcement and Chloroprene CR, pricked cover. Suitable for Liquid Petroleum Gas (LPG) acc. to EN 589. For tank trucks and refuelling stations. Temperature range -20°C up to +90°C, temporarily up to 100°C. Electrically dissipative...

Rubber expansion joint WhiteBand ERV-W

Rubber expansion joint WhiteBand ERV-W

WhiteBand ERV-W -  this rubber expansion joint is made of NBR light grey, seamless, abrasion resistant liner with PA textile cord reinforcement and Chloroprene (CR) cover. Suitable for Foodstuffs, also oil and fat containing food. Temperature range -20°C up to +90°C, temporarily up to 100°C. Electrically non-conductive ..

Showing 1 to 7 of 7 (1 Pages)