EPDM rubber expansion joints

An EPDM expansion joint offers a number of advantages, and is usually used in piping to prevent damage to surrounding structures. The EPDM expansion joints help to provide relief from thermal, extension and contraction stresses in pipes or duct installations.

The EPDM rubber expansion joint can stand temperatures of up to 110-130°C and diluted bases and acids. The rubber EPDM expansion joint are able to resist UV rays, weathering and is suitable for outdoor applications. 

There's continual movement in these systems because of varying temperatures, and this is caused by the temperatures and composition of materials or gasses that pass through the system.

EPDM Rubber expansion joints help to absorb the movement and this keeps the surrounding duct or pipe work from pulling apart, buckling or leaking.  It's an easy way to cut down on maintenance cost, because replacing duct or pipe work could be expensive.


Full Face Rubber Flange Rubber expansion joint

Full Face Rubber Flange Rubber expansion joint

Description Expansion Joints with Full Face Rubber Flange. The full face flanges are integral with the body of the joint and drilled to conform the bolt pattern of the companion flanges of the pipe line. These are high quality "custom-made” Expansion Joints supplied with split or fixed flanges in carbon steel as standard. Body: EPDM, EPDM ..

Rubber expansion joint ERP RedSpot

Rubber expansion joint ERP RedSpot

Rubber expansion joints RedSpot ERP- Butyl are made of (IIR) / EPDM, seamless liner with PA textile cord reinforcement and EPDM cover. Suitable for Sanitary installations, highly flexible, for cold and warm water, pool water, sea water, drinking water. Temperature range -40°C up to +90°C, temporarily up to +120°C. Electrically dissipative...

Rubber expansion joint ERV-BR BlueSpot

Rubber expansion joint ERV-BR BlueSpot

ERV-BR BlueSpot expansion bellows (expansion joints) are for use where abrasive material is present in the media, with a temperature range of -50 deg C to +70 deg C. Lined with a uniquely tough compound, the Blue-Spot rubber bellows range is designed specifically for abrasive media. Blue-Spot rubber expansion joints can also be fitted with a full r..

Rubber expansion joint ERV-CR BlackBand

Rubber expansion joint ERV-CR BlackBand

Rubber expansion joint BlackBand ERV-CR - Chloroprene CR, seamless, abrasion resistant liner with PA textile cord reinforcement and Chloroprene CR cover. Suitable for Water, swimming pool water, sea water, waste water (weakly sour or alkaline) or oil containing, cooling water with oily additives, lubricating oil, grease and air, compressed air. Tem..

Rubber expansion joint ERV-GR GREENBAND

Rubber expansion joint ERV-GR GREENBAND

ERV-GR GREENBAND expansion  is made of - Hypalon® (CSM), seamless, high abrasion resistance liner with PA textile cord reinforcement and Hypalon® (CSM) cover. Suitable for Chemicals, acids, alkalis and aggressive chemical waste water. For oil-contaminated compressed air up to +90°C . Temperature range -20°C up to +100°C, temporarily up to +110°C. E..

Rubber expansion joint ERV-R RedBand

Rubber expansion joint ERV-R RedBand

RedBand ERV-R - Butyl (IIR) / EPDM, seamless, low permeation liner with PA textile cord, Butyl rubberized reinforcement and EPDM, ozone proof, heat resistant cover. Suitable for Drinking water, cold and warm waste water, seawater, cooling water, water with chemical additives, low concentrated acids and alkalis, salt solutions, technical alcohols, e..

Rubber expansion joint ERV-ROTEX DoubleRed

Rubber expansion joint ERV-ROTEX DoubleRed

Rubber expansion joint ROTEX DoubleRed - EPDM, hot water resistant, seamless, high abrasion resistance liner with Polymer textile cord, hot water and hydrolysis proof reinforcement and EPDM, ozone proof, heat resistant cover. Suitable for Hot heating water, cooling water and hot air. Approved DIN 4809. Temperature range -40° C up to +130°C, tempora..

Showing 1 to 7 of 7 (1 Pages)