Rubber expansion joints for oils

The rubber expansion joints for oil have very good oil- and gasoline-resistance and are suitable for gases which have oil vapours. The key function of these rubber expansion joints is the ability to withstand the deteriorating effects of oil (generally refers to petroleum) on the physical properties.

This type of rubber expansion joints joint can handle solvents and greases. This group of expansion joints includes CR, NBR, HNBR and Viton bellows - each with its advantages depending on the type of the lubricant and the working conditions.


Rubber expansion joint ERV-CR BlackBand

Rubber expansion joint ERV-CR BlackBand

Rubber expansion joint BlackBand ERV-CR - Chloroprene CR, seamless, abrasion resistant liner with PA textile cord reinforcement and Chloroprene CR cover. Suitable for Water, swimming pool water, sea water, waste water (weakly sour or alkaline) or oil containing, cooling water with oily additives, lubricating oil, grease and air, compressed air. Tem..

Rubber expansion joint ERV-G YELLOWBAND

Rubber expansion joint ERV-G YELLOWBAND

ERV-G YELLOWBAND rubber expansion joint is made of NBR (nitrile), seamless, abrasion resistant liner with PA textile cord reinforcement and Chloroprene CR cover. Suitable for Petroleum based products, fuel ethanol blend e.g. E 85 and DIN EN fuels up to 50% aromatic content, also town gas and natural gas, except for LP gas. Temperature range for..

Rubber expansion joint ERV-G YellowBandLT

Rubber expansion joint ERV-G YellowBandLT

The rubber expansion joints ERV-G YellowBandLT - are made of NBR (nitrile), seamless, high abrasion resistance liner with PA textile cord reinforcement and Chloroprene CR cover. Suitable for Low temperature applications for petroleum based products, diesel, heating oil up to +90°C, aviation fuel JET A1, kerosene, petroleum up to +60°C and gasol..

Rubber expansion joint ERV-GS YellowSteel

Rubber expansion joint ERV-GS YellowSteel

YellowBand ERV-GS - NBR (nitrile), seamless, abrasion resistant liner with Steel wire cord reinforcement and Chloroprene CR cover. Suitable for Petroleum based products, DIN EN fuels up to 50% aromatic content, cooling water with oily anticorrosion additives, lubrication and hydraulic oil, seawater. Temperature range -20°C up to +90°C, temp..

Rubber expansion joint ERV-GS-HNBR YellowSteel

Rubber expansion joint ERV-GS-HNBR YellowSteel

Rubber expansion joints ERV-GS-HNBR YellowSteel - HNBR (nitrile), seamless, high abrasion resistance liner with Steel wire cord reinforcement and Chloroprene CR cover. Suitable for Petroleum based products, DIN EN fuels up to 50% aromatic content, cooling water with oily anticorrosion additives, lubrication and hydraulic oil, seawater. Very goo..

Rubber expansion joint Vitex

Rubber expansion joint Vitex

VITEX - FPM, seamless, no permeation liner with PA textile cord, specially rubberized reinforcement and ECO cover. Suitable for Aggressive media, hot oils, benzene, xylene, fuels with an aromatic content > 50%, bio diesel, aromatic/chlorinated hydrocarbons and mineral acids. Excellent resistance against weathering, ageing and ozone. Temperatu..

Showing 1 to 6 of 6 (1 Pages)