HVAC

Rubber expansion joints for HVAC - (Air Conditioning, Heating, and Ventilating Systems). The HVAC rubber expansion joints eliminate stresses caused by changes in temperature and piping misalignment, as well as reduce the transmission of noise and vibration. The HVAC rubber expansion joints are used on both hot and chilled water circulation lines, suction and discharge sides of pumps, and header connections.

The HVAC rubber expansion joints absorb the continuing movement experienced in piping systems because of varying ambient temperatures, differences in temperature of materials being handled, and differences in composition. The danger of buckling or pulling apart and resulting maintenance costs are eliminated.


Rubber expansion joint  - EPDM - Red Stripe

Rubber expansion joint - EPDM - Red Stripe

Rubber expansion joint  - EPDM - Red Stripe The base material for this rubber expansion joint is high quality EPDM.  This bellow is suitable for Drinking water, has an WRAS approval. Except this it is resistant to cold and warm waste water, seawater, cooling water, water with chemical additives, low concentrated acids and alkalis, salt solutions, technical alcohols, esters and ketones. It can handle hot water and cooling water with salt solutions as well. The EPDM ru..

Rubber expansion joint - CR NEOPRENE - Black

Rubber expansion joint - CR NEOPRENE - Black

Rubber expansion joint - CR NEOPRENE - Black Our Rubber expansion joint - CR / NEOPRENE - Black is made of Chloroprene CR  / Polychloroprene. It offers seamless, abrasion resistant liner with PA textile cord reinforcement and Chloroprene CR cover. The CR / Neoprene rubber expansion joint of this type is made of the best multi-function rubber. Neoprene rubber has a good resistance to temperature changes, ozone action and adverse weather conditions. The offered Neoprene R..

Rubber expansion joint - IIR BUTYL - Red+Blue

Rubber expansion joint - IIR BUTYL - Red+Blue

Rubber expansion joint - IIR BUTYL - Red+Blue Rubber expansion joints - IIR BUTYL - with red+blue stripes are made of (IIR / EPDM, mixture). They have a seamless liner with PA textile cord reinforcement and EPDM cover. The base material for these Rubber expansion joints is IIR BUTYL rubber with red+blue stripes marking. They offer low gas permeability, good ozone and weather resistance. The IIR BUTYL - red+blue Rubber expansion joint is resistant to oxidizing agents,..

Rubber expansion joint EPDM HT DoubleRed

Rubber expansion joint EPDM HT DoubleRed

Rubber expansion joint - EPDM HT - DoubleRed Made of a Special EPDM rubber compound suitable for high temperature up to 140 °C applications without hardening. Weather-resistant, good gas tightness, resistant to attack by oxygen, U.V., ozone and extreme weather environments. Rubber expansion joint EPDM HT DoubleRed is resistant to High temperature applications up to 140 °C. This high temperature EPDM rubber expansion joint can handle Hot water, cooling water with salt..

Showing 1 to 4 of 4 (1 Pages)