Cylindrical Bow Rubber Fenders

Cylindrical Bow Rubber Fenders

This type of Cylindrical fenders are often mounted at the central point - on bow and stern of push drive tugboats and workboats.

In tandem with Keyhole, M or W-shape rubber fenders, these Cylindrical Bow Rubber Fenders are often used for any marine applications. 

We produce this sort of fenders  by winding up to a diameter of 1000 mm. If needed, beveled or tapered ends can be provided to achieve an improved connection to the ship surface and additional grooves with chains or nylon straps for additional attachment. 

Cylindrical Bow Rubber Fenders usually can be manufactured by extrusion with a diameter up to 500 mm and are attached to a vessel by a chain which goes  through their round chamber.

Cylindrical Bow Rubber Fenders with a larger diameter are manufactured with additional grooves in the circumference of the fender for additional mounting possibilities with the help of nylon straps or cables

Depending on the diameter of the Cylindrical Bow Rubber Fenders the unit length can go up to 10 metres. Connection plugs can be installed on the rubber fenders to achieve longer lengths. Almost every of our cylindrical bow & stern fenders can be customised according to your specific requirements.


Cylindrical bow & stern fenders

Cylindrical bow & stern fenders

Cylindrical bow & stern fenders are often installed as the most significant push-fender on both the bow and the stern of tugboats and workboats. In tandem with keyhole, M or W fenders, these rubber fenders are often used on the spear.  We manufacture this sort of fender by winding it up to a diameter of Ø 1000 mm. For a stronger connection to the ship we can design it with grooves for additional binding with chains or nylon straps. Using a chain through the round cha..

Showing 1 to 1 of 1 (1 Pages)